[fcoe] Request SPMA iff FIP advertisement indicates support for SPMA
We currently set both the FP and SP bits in our FIP FLOGI, to allow
the FCF the choice of selecting either a fabric-provided or a server-
provided MAC address. This complies with the FCoE specification, but
has been observed to result in an FLOGI rejection from some FCFs.
Fix by recording whether or not the FCF supports SPMA, and requesting
only one of FPMA or SPMA in our FIP FLOGI. We choose to prefer SPMA
where available, because many iPXE drivers will not be able to receive
unicast packets sent to a non-default MAC address.
Reported-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When using binutils 2.20, it seems to be necessary to add -ldl to link
against -lbfd.
Reported-by: Duane Voth <duanev@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Include session state metadata in packet traces
(Ab)use the "secs" field in transmitted DHCP packets to convey
metadata about the DHCP session state. In particular:
bit 0 represents the receipt of a ProxyDHCPOFFER
bit 1 represents the receipt of a DHCPOFFER
bits 2+ represent the transmitted packet sequence number
This allows some relevant information about the internal state of the
DHCP session to be read out from a packet trace from a non-debug build
of iPXE. It also potentially allows replies to be correlated to their
requests (for servers that copy the "secs" field from request to
reply).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Omit ProxyDHCPREQUEST if PXE options are present in ProxyDHCPOFFER
Some ProxyDHCP implementations seem to violate the PXE specification
by expecting the client to retain options from the ProxyDHCPOFFER
rather than issuing a separate ProxyDHCPREQUEST.
Work around such broken clients by retaining the ProxyDHCPOFFER
packet, and proceeding to a ProxyDHCPREQUEST only if the
ProxyDHCPOFFER does not already contain PXE options.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A recent patch series breaks compatibility with various common DHCP
implementations.
Revert "[dhcp] Don't consider invalid offers to be duplicates"
This reverts commit 905ea56753.
Revert "[dhcp] Honor PXEBS_SKIP option in discovery control"
This reverts commit 620b98ee4b.
Revert "[dhcp] Keep multiple DHCP offers received, and use them intelligently"
This reverts commit 5efc2fcb60.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
FCoE requires us to be able to receive unicast packets for multiple
addresses. Support this by operating in promiscuous mode.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fc] Update ELS port IDs when receiving an ELS frame
The port ID assigned by the FLOGI response is implicit in the
destination ID used for the response (which will differ from the
source ID used for the corresponding request).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Pass both link-layer addresses in net_tx() and net_rx()
FCoE requires the use of fabric-provided MAC addresses, which breaks
the assumption that the net device's MAC address is implicitly the
source address for net_tx() and the (unicast) destination address for
net_rx().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[int13] Include disk signature in debugging output
The disk signature is used by some OSes (notably Windows) to identify
the boot disk, so it's useful debugging information to have.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[libc] Ensure that error numbers from EUNIQ() have the correct type
Error numbers are signed ints. EUNIQ() should not allow implicit type
promotion based on the supplied error diambiguator, because this
causes problems with statements such as
rc = ( condition ? -EUNIQ ( EBASE, disambiguator ) : -EBASE );
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[int13] Add infrastructure to support EDD version 4.0
Support the extensions mandated by EDD 4.0, including:
o the ability to specify a flat physical address in a disk address
packet,
o the ability to specify a sector count greater than 127 in a disk
address packet,
o support for all functions within the Fixed Disk Access and EDD
Support subsets,
o the ability to describe a device using EDD Device Path Information.
This implementation is based on draft revision 3 of the EDD 4.0
specification, with reference to the EDD 3.0 specification. It is
possible that this implementation may need to change in order to
conform to the final published EDD 4.0 specification.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[aoe] Fail immediately when network device is closed
Avoid a tedious timeout delay when attempting to issue a command over
a network device that has been closed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Modify "set" command to allow space separated values
Allow multiple, space separated values (such as kernel arguments,
passed via DHCP) to be assigned to an identifier using the "set"
command.
Originally-implemented-by: Aaron Brooks <aaron@brooks1.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add PRM structures to support Hermon Ethernet devices.
Signed-off-by: Itay Gazit <itaygazit@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Unlike Arbel, port parameters must be applied via a separate call to
SET_PORT, rather than as parameters to INIT_PORT.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fc] Allow FLOGI response to be sent to newly-assigned peer port ID
The response to a received FLOGI should probably be sent to the peer
port ID assigned as a result of the WWPN comparison.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[hermon] Minimise the number of VPM mapping operations
Mapping a single page at a time causes a several-second delay at
device initialisation time. Reduce this by mapping multiple pages at
a time, using the largest block sizes possible given the alignment
constraints.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[arbel] Minimise the number of VPM mapping operations
Mapping a single page at a time causes a several-second delay at
device initialisation time. Reduce this by mapping multiple pages at
a time, using the largest block sizes possible given the alignment
constraints.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[arbel] Allocate only as much memory as is needed for firmware and ICM
Use individual page mappings rather than a single whole-region
mapping, to avoid the waste of memory that occurs due to the
constraint that each mapped block must be aligned on its own size.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[arbel] Synchronise changes with the Hermon driver
Backport some changes from the Hermon driver to the Arbel driver.
Specifically:
o Rename reserved_lkey to lkey
o Add arbel_rate() to calculate transmission rates
o Structure code to allow for addition of RC queue pairs
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[arbel] Optimise ICM layout to reduce overall memory usage
Reduce the amount of ICM space required by choosing to order the
various allocations in approximately descending order of alignment
requirements.
This saves approximately 512kB of host memory.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[arbel] Perform ICM allocations according to the specification
The current method for ICM allocation exactly matches the addresses
chosen by the old Etherboot driver, but does not match the
specification. Some ICM tables (notably the queue pair context table)
therefore end up incorrectly aligned.
Fix by performing allocations as per the specification.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Improve the utility of debugging messages by including the relevant
port number, queue number (QPN, CQN, EQN), work queue entry (WQE)
number, and physical addresses wherever applicable.
Add arbel_dump_cqctx() for dumping a completion queue context and
arbel_dump_qpctx() for dumping a queue pair context.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[arbel] Randomise the high-order bits of queue pair numbers
This is a backport of commit 0b1222f ("[hermon] Randomise the
high-order bits of queue pair numbers") to the Arbel driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[arbel] Allow software GMA to receive packets destined for QP1
This is a backport of commit cd5a213 ("[hermon] Allow software GMA to
receive packets destined for QP1") to the Arbel driver.
This patch includes a correction to a bug in the autogenerated
hardware description header file.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Only port state change events are currently mapped to our event queue,
since those are the only events we are prepared to handle. This
ignores a potentially useful source of diagnostic information in the
case of unexpected failures.
Fix by mapping all events to the event queue; a build with debugging
enabled will therefore at least dump the raw content of the unexpected
events.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown