These files cannot be automatically relicensed by util/relicense.pl
since they either contain unusual but trivial contributions (such as
the addition of __nonnull function attributes), or contain lines
dating back to the initial git revision (and so require manual
knowledge of the code's origin).

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Some external code (observed with FreeBSD's bootloader) will continue
to make INT 13 calls after reconfiguring the 8259 PIC to change the
vector offsets for IRQs.  If an IRQ (e.g. the timer IRQ) subsequently
occurs while iPXE is in protected mode, this will cause a general
protection fault since the corresponding IDT entry is empty.

A general protection fault is INT 0x0d, which happens to overlap with
the original IRQ5.  We therefore do have an ISR set up to handle a
general protection fault, but this ISR simply reflects the interrupt
down to the real-mode INT 0x0d and then attempts to return.  Since our
ISR is expecting a hardware interrupt rather than a general protection
fault, it doesn't remove the error code from the stack before issuing
the iret instruction; it therefore attempts to return to a garbage
address.  Since the segment part of this address is likely to be
invalid, a second general protection fault occurs.  This cycle
continues until we run out of stack space and triple fault.

Fix by reflecting all INTs down to real mode.  This actually reduces
the code size by four bytes (but increases the bss size by almost
2kB).

Reported-by: Brian Rak <dn@devicenull.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

Interrupt processing adds noise to profiling results.  Allow
interrupts (from within protected mode) to be profiled separately,
with time spent within the interrupt handler being excluded from any
other profiling currently in progress.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Ensure that all segment registers have zero in the low two bits before
transitioning to protected mode.  This allows the CPU state to
immediately be deemed to be "valid", and eliminates the need for any
further emulated instructions.

Load the protected-mode interrupt descriptor table after switching to
protected mode, since this avoids triggering an EXCEPTION_NMI and
corresponding VM exit.

This reduces the time taken by real_to_prot under KVM by around 50%.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

When running in a virtual machine, switching to real mode may be
expensive.  Allow interrupts to be enabled while in protected mode and
reflected down to the real-mode interrupt handlers.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Add FILE_LICENCE declarations to almost all files that make up the
various standard builds of gPXE.

The userptr_t is now the fundamental type that gets used for conversions.
For example, virt_to_phys() is implemented in terms of virt_to_user() and
user_to_phys().

outside of librm.S.

advantage of the fact that we have to have a permanently-resident block
in base memory.

initialise_via_librm.

call it initialise() and place it in main.c.  :)

of librm.