Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

Script lines can be arbitrarily long; allocate on the heap rather than
on the stack.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Solaris assumes that there is enough space above the Multiboot modules
to use as a decompression and scratch area.  This assumption is
invalid when using iPXE, which places the Multiboot modules near the
top of (32-bit) memory.

Fix by copying the modules to an area of memory immediately following
the loaded kernel.

Debugged-by: Michael Brown <mcb30@ipxe.org>
Debugged-by: Scott McWhirter <scottm@joyent.com>
Tested-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@ipxe.org>

iPXE exposes some extended capabilities via the PXE FILE API to allow
NBPs such as pxelinux to use protocols other than TFTP.  Provide an
equivalent interface as a UEFI protocol so that EFI binaries may also
take advantage of iPXE's extended capabilities.

This can be used with a patched version of elilo, for example:

  http://comments.gmane.org/gmane.comp.boot-loaders.elilo.general/147

Signed-off-by: Michael Brown <mcb30@ipxe.org>

CRLF line terminators are allowed in scripts; the carriage return is
simply interpreted as trailing whitespace and so is ignored.  This
fails on lines containing script labels, since the label-finding code
checks for a line containing only the ":" marker and the label itself
(without any trailing whitespace).

Fix by allowing a label to be terminated by either a NUL or a
whitespace character.

Reported-by: Bovey Christian <Christian.Bovey@chuv.ch>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

Reported-by: Itay Gazit <itayg@mellanox.co.il>
Suggested-by: Michael R Turner <mikeyt@us.ibm.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

A script that downloads a new image using imgdownload() with the
action register_and_replace_image() can now be freed immediately
before the replacement image is executed.  This functionality is not
yet exposed via an iPXE command.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Some prefixes (e.g. .lkrn) allow a command line to be passed in to
iPXE.  At present, this command line is ignored.

If a command line is provided, treat it as an embedded script (without
an explicit "#!ipxe" magic marker).  This allows for patterns of
invocation such as

  title  iPXE
  kernel /boot/ipxe.lkrn dhcp && \
         sanboot iscsi:10.0.4.1::::iqn.2010-04.org.ipxe.dolphin:storage

Here GRUB is instructed to load ipxe.lkrn with an embedded script
equivalent to

  #!ipxe
  dhcp
  sanboot iscsi:10.0.4.1::::iqn.2010-04.org.ipxe.dolphin:storage

This can be used to effectively vary the embedded script without
having to rebuild ipxe.lkrn.

Originally-implemented-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

The "prompt" command exposes the prompt() function, allowing a script
to prompt the user for a keypress and take action depending on the
result.  For example

  #!ipxe

  prompt -k 0x197e -t 2000 Press F12 to boot from network... || exit
  autoboot

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Refactor the {load,exec} image operations as {probe,exec}.  This makes
the probe mechanism cleaner, eliminates some forward declarations,
avoids holding magic state in image->priv, eliminates the possibility
of screwing up between the "load" and "exec" stages, and makes the
documentation simpler since the concept of "loading" (as distinct from
"executing") no longer needs to be explained.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

The online documentation (e.g. http://ipxe.org/cmd/ifopen), though not
yet complete, is far more comprehensive than could be provided within
the iPXE binary.  Save around 200 bytes (compressed) by removing the
command descriptions from the interactive help, and instead referring
users directly to the web page describing the relevant command.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Remove the concept of shutdown exit flags, and replace it with a
counter used to keep track of exposed interfaces that require devices
to remain active.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@ipxe.org>

The && and || operators should be left-associative, since that is how
they are treated in most other languages (including C and Unix
shell).  For example, in the command:

  dhcp net0 && goto dhcp_ok || echo No DHCP on net0

if the "dhcp net0" fails then the "echo" should be executed.

After an "exit" or a successful "goto", further commands on the same
line should never be executed.  For example:

  goto somewhere && echo This should never be printed
  exit 0 && echo This should never be printed
  exit 1 && echo This should never be printed

An "exit" should cause the current shell or script to terminate and
return the specified exit status to its caller.  For example:

  chain test.ipxe && echo Success || echo Failure
    [in test.ipxe]
    #!ipxe
    exit 0

should echo "Success".

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Allow script labels to be defined using the syntax

  :<labelname>

(nothing else allowed on the line, including whitespace).  Labels are
ignored during script execution, but can be used as the target of the
"goto" command.  For example:

  #!ipxe

  goto machine_${net0/ip} || goto machine_default

  # Linux kernel boot
  :machine_10.0.0.101
  :machine_10.0.0.102
  set filename http://my.boot.server/vmlinuz
  goto done

  # Default configuration
  :machine_default
  set filename pxelinux.0
  goto done

  # Boot selected configuration
  :done
  chain ${filename}

Originally-implemented-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Originally-implemented-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

pcbios specific get_memmap() is used by the b44 driver making
all-drivers builds fail on other platforms.  Move it to the I/O API
group and provide a dummy implementation on EFI.

Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

Since more reference-counted structures than embedded images might
want to mark themselves unfreeable, expose a dummy ref_no_free().

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Standardise on using ref_init() to initialise an embedded reference
count, to match the coding style used by other embedded objects.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Add a new network driver that consumes the EFI Simple Network
Protocol.  Also add a bus driver that can find the Simple Network
Protocol that iPXE was loaded from; the resulting behavior is similar
to the "undionly" driver for BIOS systems.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Add preprocessor magic to the error definitions to enable every error
usage to be tracked.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain.  Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.

Also update README, LOG and COPYRIGHTS to remove obsolete information.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Windows text editors such as Notepad tend to use CRLF line endings,
which breaks gPXE's signature detection for script images.  Since
scripts are usually very small, they end up falling back to being
detected as valid PXE executable images (since there are no signature
checks for PXE executables).  Executing text files as x86 machine code
tends not to work well.

Fix by allowing for any isspace() character to terminate the "#!gpxe"
signature, and by ensuring that CR characters get stripped during
command line parsing.

Suggested-by: Shao Miller <Shao.Miller@yrdsb.edu.on.ca>

Add FILE_LICENCE declarations to almost all files that make up the
various standard builds of gPXE.

NetBSD kernels are multiboot ELF kernels with an entry point
incorrectly specified as a virtual address rather than a physical
address.

Work around this by looking for the segment that could plausibly
contain the entry point address (interpreted as either a physical or
virtual address), and using that to determine the eventual physical
entry point.

In the event of any ambiguity, precedence is given to interpretation
of the entry point as a physical address.

prep_segment() can sometimes fail because an image requests memory
that is already in use by gPXE.  This will happen if
e.g. undionly.kpxe is used to boot memtest86; the memtest86 image is
an old-format kernel that needs to be loaded at 9000:0000, but this
area of memory may well already be in use by the underlying PXE stack.

Add a human-friendly error message, so that the cause is more
immediately visible.

Having a default script containing

  #!gpxe
  autoboot

can cause problems when entering commands to load and start a kernel
manually; the default script image will still be present when the
kernel is started and so will be treated as an initrd.  It is possible
to work around this by typing "imgfree" before any other commands, but
this is counter-intuitive.

Fix by allowing the embedded image list to be empty (in which case we
just call autoboot()), and making this the default.

Reported by alkisg@gmail.com.

Multi-level menus via COMBOOT rely on the COMBOOT program being able
to exit and invoke a new COMBOOT program (the next menu).  This works,
but rapidly (within about five iterations) runs out of space in gPXE's
internal stack, since each new image is executed in a new function
context.

Fix by allowing tail recursion between images; an image can now
specify a replacement image for itself, and image_exec() will perform
the necessary tail recursion.

Both the script and PXE images types will claim a zero-length image.
Inhibit this to avoid end-user surprises.

This patch extends the embedded image feature to allow multiple
embedded images instead of just one.

gPXE now always boots the first embedded image on startup instead of
doing the hardcoded DHCP boot (aka autoboot).

Based heavily upon a patch by Stefan Hajnoczi <stefanha@gmail.com>.

Try to avoid future problems caused by implicit section flags and/or
type information by instituting a policy that all .section
declarations must explicitly state the flags and type.

Most of this change was achieved using

    perl -pi \
      -e 's/".text"$/".text", "ax", \@progbits/ ; ' \
      -e 's/".text16"$/".text16", "ax", \@progbits/ ; ' \
      -e 's/".text16.null"$/".text16.null", "ax", \@progbits/ ; ' \
      -e 's/".text16.data"$/".text16.data", "aw", \@progbits/ ; ' \
      -e 's/".data"$/".data", "aw", \@progbits/ ; ' \
      -e 's/".data16"$/".data16", "aw", \@progbits/ ; ' \
      -e 's/".bss"$/".bss", "aw", \@nobits/ ; ' \
      -e 's/".bss16"$/".bss16", "aw", \@nobits/ ; ' \
      -e 's/".prefix"$/".prefix", "ax", \@progbits/ ; ' \
      -e 's/".prefix.lib"$/".prefix.lib", "awx", \@progbits/ ; ' \
      -e 's/".prefix.data"$/".prefix.data", "aw", \@progbits/ ; ' \
      -e 's/".weak"$/".weak", "a", \@nobits/ ; ' \
      `git grep -l '\.section'`

EFI_STATUS is defined as an INTN, which maps to UINT32 (i.e. unsigned
int) on i386 and UINT64 (i.e. unsigned long) on x86_64.  This would
require a cast each time the error status is printed.

Add efi_strerror() to avoid this ickiness and simultaneously enable
prettier reporting of EFI status codes.

This brings us in to line with Linux definitions, and also simplifies
adding x86_64 support since both platforms have 2-byte shorts, 4-byte
ints and 8-byte long longs.

We have EFI APIs for CPU I/O, PCI I/O, timers, console I/O, user
access and user memory allocation.

EFI executables are created using the vanilla GNU toolchain, with the
EXE header handcrafted in assembly and relocations generated by a
custom efilink utility.

We can just treat all non-kernel images as initrds, which matches our
behaviour for multiboot kernels.  This allows us to eliminate initrd as
an image type, and treat the "initrd" command as just another synonym for
"imgfetch".

OpenBSD throws compiler warnings that we can't reproduce on Linux, for
some reason.

Original patch from Dewey Hylton <dewey@hyltown.com>.

Delete ELF as a generic image type.  The method for invoking an
ELF-based image (as well as any tables that must be set up to allow it
to boot) will always depend on the specific architecture.  core/elf.c
now only provides the elf_load() function, to avoid duplicating
functionality between ELF-based image types.

Add arch/i386/image/elfboot.c, to handle the generic case of 32-bit
x86 ELF images.  We don't currently set up any multiboot tables, ELF
notes, etc.  This seems to be sufficient for loading kernels generated
using both wraplinux and coreboot's mkelfImage.

Note that while Etherboot 5.4 allowed ELF images to return, we don't.
There is no callback mechanism for the loaded image to shut down gPXE,
which means that we have to shut down before invoking the image.  This
means that we lose device state, protection against being trampled on,
etc.  It is not safe to continue afterwards.

When the embedded image is a script, the unregister_image() performed by
image/script.c corrupts memory, since image/embedded.c omitted the call
to register_image().

This is the first bug fixed using Stefan Hajnoczi's gdb stub for gPXE.

executing any image, not just a script.  (This will enable pxelinux to
use relative URIs, should it wish to.)

Print error status using strerror().