[romprefix] Round up PMM allocation sizes to nearest 4kB
Some AMI BIOSes apparently break in exciting ways when asked for PMM
allocations for sizes that are not multiples of 4kB.
Fix by rounding up the image source area to the nearest 4kB. (The
temporary decompression area is already rounded up to the nearest
128kB, to facilitate sharing between multiple iPXE ROMs.)
Reported-by: Itay Gazit <itayg@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Change the DMA alignment from 4096 bytes to 16 bytes, to conserve
available DMA memory. The hardware doesn't have any specific
alignment requirements.
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Reduce CPU usage while waiting for user input. This is particularly
important for virtual machines, where CPU is a shared resource.
Reported-by: Alessandro Salvatori <alessandro@embrane.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Similarly to FreeBSD, OpenBSD requires the object format to be
specified as elf_i386_obsd rather than elf_i386.
Reported-by: Jiri B <jirib@devio.us>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[romprefix] Report a pessimistic runtime size estimate
PCI3.0 allows us to report a "runtime size" which can be smaller than
the actual ROM size. On systems that support PMM our runtime size
will be small (~2.5kB), which helps to conserve the limited option ROM
space. However, there is no guarantee that the PMM allocation will
succeed, and so we need to report the worst-case runtime size in the
PCI header.
Move the "shrunk ROM size" field from the PCI header to a new "iPXE
ROM header", allowing it to be accessed by ROM-manipulation utilities
such as disrom.pl.
Reported-by: Anton D. Kachalov <mouse@yandex-team.ru>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[contrib] Fix rom-o-matic git version number issues
Fixes issue in which git version number is not displayed on startup
when iPXE is built through rom-o-matic.
Remove special characters from filename generated by rom-o-matic (so
that you get "ipxe-1.0.0+c3b4-undionly.kkpxe" instead of
"ipxe-1.0.0+ (c3b4)-undionly.kkpxe")
Signed-off-by: Michael Brown <mcb30@ipxe.org>
gcc 4.7 produces a spurious warning about an array subscript being out
of bounds. Use a pointer dereference instead of an array lookup to
inhibit this spurious warning.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Simplify the process of booting by ensuring that old images are not
left registered after an unsuccessful autoboot attempt.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose image tail-recursion to iPXE scripts via the "--replace"
option. This functions similarly to exec() under Unix: the
currently-executing script is replaced with the new image (as opposed
to running the new image as a subroutine).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Standardise #include guard in ipxe_download.h
The script include/ipxe/efi/import.pl relies on a particular format
for the #include guard in order to detect EFI headers that are not
imported.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
PXENV_FILE_CMDLINE is an iPXE extension, and will not be supported by
most PXE stacks. Do not report any errors to the user, since in
almost all cases the error will mean simply "not loaded by iPXE".
Reported-by: Patrick Domack <patrickdk@patrickdk.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The EFI_CPU_IO_PROTOCOL is not available on all EFI platforms. In
particular, it is not available under OVMF, as used for qemu.
Since the EFI_CPU_IO_PROTOCOL is an abomination of unnecessary
complexity, banish it and use raw I/O instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Attempt to restore the network device to the state it was in prior to
calling the NBP. This simplifies the task of taking follow-up action
in an iPXE script.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Expose exit status of failed command via ${errno}
Allow scripts to report errors in more detail by exposing the most
recent error via the ${errno} setting. For example:
chain ${filename} || goto failed
...
:failed
imgfree http://192.168.0.1/ipxe_error.php?error=${errno}
Note that ${errno} is valid only immediately after executing a failed
command.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pxeprefix] Place temporary stack after iPXE binary
Some BIOSes (observed on a Supermicro system with an AMI BIOS) seem to
use the area immediately below 0x7c00 to store data related to the
boot process. This data is currently liable to be overwritten by the
temporary stack used while decompressing and installing iPXE.
Try to avoid any such problems by placing the temporary stack
immediately after the loaded iPXE binary. Any memory used by the
stack could then potentially have been overwritten anyway by a larger
binary.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
On i350 the datasheet contradicts itself in stating that the default
value of RXDCTL.ENABLE for queue zero is both set (according to the
"Receive Initialization" section) and unset (according to the "Receive
Descriptor Control - RXDCTL" section). Empirical evidence suggests
that the default value is unset.
Explicitly enable both transmit and receive queues to avoid any
ambiguity.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[intel] Refill receive ring only after enabling receiver
On 82576 (and probably others), the datasheet states that "the tail
register of the queue (RDT[n]) should not be bumped until the queue is
enabled". There is some confusion over exactly what constitutes
"enabled": the initialisation blurb says that we should "poll the
RXDCTL register until the ENABLE bit is set", while the description
for the RXDCTL register says that the ENABLE bit is set by default
(for queue zero). Empirical evidence suggests that the ENABLE bit
reads as set immediately after writing to RCTL.EN, and so polling is
not necessary.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[bzimage] Update setup_move_size only for protocol versions 2.00 and 2.01
The setup_move_size field is not defined in protocol versions earlier
than 2.00 (and is obsolete in versions later than 2.01). In binaries
using versions earlier than 2.00, the relevant location is likely to
contain executable code.
Interestingly, this bug has been present since support for pre-2.00
protocol versions was added in 2009, and has been unexpectedly
modifying the memtest86+ code fragment:
mov $0x92, %dx
inb %dx, %al
Fortuitously, the modification exactly overwrote the value loaded into
%dx, and so the net effect was limited to causing Fast Gate A20
detection to always fail.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A window size of 256kB should be sufficient to allow for
full-bandwidth transfers over a Gigabit LAN, and for acceptable
transfer speeds over other typical links.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The maximum TCP throughput is fundamentally limited by the amount of
available receive buffer space. Increase the heap size from 128kB to
512kB to allow the use of larger TCP windows.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcp] Truncate TCP window to prevent future packet discards
Whenever memory pressure causes a queued packet to be discarded (and
so retransmitted), reduce the maximum TCP window to a size that would
have prevented the discard.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Discarding the active ARP cache entry in the middle of a download will
substantially disrupt the TCP stream. Try to minimise any such
disruption by treating ARP cache entries as expensive, and discarding
them only when nothing else is available to discard.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[iobuf] Allocate I/O buffer descriptor separately to conserve aligned memory
I/O buffers are allocated on aligned boundaries. The I/O buffer
descriptor (the struct io_buffer) is currently attached to the end of
the I/O buffer. When the size of the buffer is close to its
alignment, this can waste large amounts of aligned memory.
For example, a network card using 2048-byte receive buffers will end
up allocating 2072 bytes on a 2048-byte boundary. This effectively
wastes 50% of the available memory.
Improve the situation by allocating the descriptor separately from the
main I/O buffer if inline allocation would cause the total allocated
size to cross the alignment boundary.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Process all received packets in net_poll()
The current logic is to process at most one received packet per call
to net_poll(), on the basis that refilling the hardware descriptor
ring should be delayed as little as possible. However, this limits
the rate at which packets can be processed and ultimately ends up
adding latency which, in turn, limits the achievable throughput.
With temporary modifications in place to essentially remove all
resource constraints (heap size increased to 16MB, RX descriptor ring
increased to 64 descriptors) and a TCP window size of 1MB, the
throughput on a gigabit (i.e. 119MBps) network can be observed to fall
off exponentially from around 115MBps to around 75MBps. Changing
net_poll() to process all received packets results in a steady
119MBps throughput.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 196751c ("[build] Enable warnings when building utilities")
revealed a previously hidden compiler warning in util/nrv2b.c
regarding an out-of-bounds array subscript in the code
#if defined(SWD_BEST_OFF)
if (s->best_pos[2] == 0)
s->best_pos[2] = key + 1;
#endif
where best_pos[] is defined by
#define SWD_BEST_OFF 1
#if defined(SWD_BEST_OFF)
unsigned int best_off[ SWD_BEST_OFF ];
unsigned int best_pos[ SWD_BEST_OFF ];
#endif
With SWD_BEST_OFF set to 1, it can be proven that all code paths
referring to s->best_off[] and s->best_pos[] will never be executed,
with the exception of the two lines above. Since these two lines
alone can have no effect on execution, we can safely undefine
SWD_BEST_OFF.
Verified by comparing md5sums of bin/undionly.kpxe before and after
the change.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown