IBM Tivoli PXE Server 5.1.0.3 is reported to send trailing garbage
bytes at the end of the OACK packet, which causes gPXE to reject the
packet and abort the TFTP transfer.

Work around the problem by processing as much as possible of the OACK,
and treating name/value parsing errors as non-fatal.

Reported-by: Shao Miller <Shao.Miller@yrdsb.edu.on.ca>

We currently send all boot server discovery requests to port 4011.
Section 2.2.1 of the PXE spec states that boot server discovery
packets should be "sent broadcast (port 67), multicast (port 4011), or
unicast (port 4011)".  Adjust our behaviour so that any boot server
discovery packets that are sent to the broadcast address are directed
to port 67 rather than port 4011.

This is required for operation with dnsmasq as a PXE server, since
dnsmasq listens only on port 67, and relies upon this (specified)
behaviour.

This change may break some setups using the (itself very broken) Linux
PXE server from kano.org.uk.  This server will, in its default
configuration, listen only on port 4011.  It never constructs a boot
server list (PXE_BOOT_SERVERS, option 43.8), and uses the wrong
definitions for the discovery control bits (PXE_DISCOVERY_CONTROL,
option 43.6).  The upshot is that it will always instruct the client
to perform multicast and broadcast discovery only.  In setups lacking
a valid multicast route on the server side, this used to work because
gPXE would eventually give up on the (non-responsive) multicast
address and send a broadcast request to port 4011, which the Linux PXE
server would respond to.  Now that gPXE correctly sends this broadcast
request to port 67 instead, it is never seen by the Linux PXE server,
and the boot fails.  The fix is to either (a) set up a multicast route
correctly on the server side before starting the PXE server, or (b)
edit /etc/pxe.conf to contain the server's unicast address in the
"multicast_address" field (a hack that happens to work).

Suggested-by: Simon Kelley <simon@thekelleys.org.uk>

This prevents gPXE from wasting time attempting to contact a ProxyDHCP
server on port 4011 if the DHCP response already contains the relevant
PXE options.  This behaviour is hinted at (though not explicitly
specified) in the PXE spec, and seems to match what the Intel client
does.

Suggested-by: Simon Kelley <simon@thekelleys.org.uk>

Add FILE_LICENCE declarations to almost all files that make up the
various standard builds of gPXE.

It is now possible to run e.g.

  make bin/rtl8139.dsk.licence

in order to see a licensing assessment for any given gPXE build.  The
assessment will either produce a single overall licence for the build
(based on combining all the licences used within the source files for
that build), or will exit with an error stating why a licence
assessment is not possible (for example, if there are files involved
that do not yet contain an explicit FILE_LICENCE() declaration).

For partly historical reasons, various files in the gPXE source tree
are licensed under different, though compatible, terms.  Most of the
code is licensed under GPLv2 with the "or later" clause, but there are
exceptions such as:

  The string.h file, which derives from Linux and is licensed as
  Public Domain.

  The EFI header files, which are taken from the EDK2 source tree and
  are licensed under BSD.

  The 3c90x driver, which has a custom GPL-like licence text.

Introduce a FILE_LICENCE() macro to make licensing more explicit.
This macro should be applied exactly once to each source (.c, .S or
.h) file.  It will cause a corresponding zero-sized common symbol to
be added to any .o files generated from that source file (and hence to
any final gPXE binaries generated from that source file).  Determining
the applicable licences to generated files can then be done using e.g.

  $ objdump -t bin/process.o | grep __licence
  00000000       O *COM*  00000001 .hidden __licence_gpl2_or_later

indicating that bin/process.o is covered entirely by the GPLv2
with the "or later" clause, or

  $ objdump -t bin/rtl8139.dsk.tmp | grep __licence
  00033e8c g     O .bss.textdata  00000000 .hidden __licence_gpl2_only
  00033e8c g     O .bss.textdata  00000000 .hidden __licence_gpl2_or_later
  00033e8c g     O .bss.textdata  00000000 .hidden __licence_public_domain

indicating that bin/rtl8139.dsk includes both code licensed under
GPLv2 (both with and without the "or later" clause) and code licensed
as Public Domain.

Determining the result of licence combinations is currently left as an
exercise for the reader.

Etherboot 5.4 erroneously treats PXENV_UNLOAD_STACK as the "final
shutdown" call, and unhooks INT15.  When using gPXE's undionly.kpxe,
this results in gPXE overwriting the portion of Etherboot located in
high memory, because it is no longer hidden from the system memory map
at the time that gPXE loads.

Work around this by explicitly testing for Etherboot as the underlying
PXE stack (as is already done in undinet.c) and skipping the call to
PXENV_UNLOAD_STACK if necessary.

Commit b149a99 ([build] Round up SUBx deltas) introduced a
signed/unsigned issue that affects gPXE images built on 32-bit hosts.
The zbin fixup utility performed an unsigned division, which led to
.usb images with an incorrect number of sectors to load.

The issue snuck by on 64-bit hosts since uint32_t is promoted to long.
On 32-bit hosts it is promoted to unsigned long.

Modified-by: Michael Brown <mcb30@etherboot.org>
Signed-off-by: Michael Brown <mcb30@etherboot.org>

NetBSD kernels are multiboot ELF kernels with an entry point
incorrectly specified as a virtual address rather than a physical
address.

Work around this by looking for the segment that could plausibly
contain the entry point address (interpreted as either a physical or
virtual address), and using that to determine the eventual physical
entry point.

In the event of any ambiguity, precedence is given to interpretation
of the entry point as a physical address.

Solaris kernels are multiboot images with the "raw" flag set,
indicating that the loader should use the raw address fields within
the multiboot header rather than looking for an ELF header.  However,
the Solaris kernel contains garbage data in the raw address fields,
and requires us to use the ELF header instead.

Work around this by always using the ELF header if present.  This
renders the "raw" flag somewhat redundant.

You can now type e.g.

  make bin/rtl8139.rom.sizes

in order to see the (uncompressed) sizes of all of the object files
linked in to bin/rtl8139.rom.  This should make it easier to identify
relevant code bloat.

Now that there are no remaining multiple-object source files, kill off
the mechanism in order to simplify the Makefile.

The build mechanism currently allows for multiple objects per source
file.  The only remaining user of this is unnrv2b.S.  Replace this
usage with a separate unnrv2b16.S wrapper file, as is currently used
for e.g. pxeprefix.S and kpxeprefix.S.

You can now type e.g.

  make bin/rtl8139.rom.deps

to see a list of the source files included in the build of
bin/rtl8139.rom.  This is intended to assist with copyright vetting.

Other new debugging targets include

  make bin/rtl8139.rom.objs

to see a list of object files linked in to bin/rtl8139.rom, and

  make bin/rtl8139.rom.nodeps

to see a list of the source files that are *not* required for the
build of bin/rtl8139.rom.

Sometimes it's just so much fun doing things the complicated way that
you forget to check the man page for the existence of a simpler
syntax.

Some utilities that expect a floppy disk image (e.g. iLO?) may test
for a file of the correct size.  Reinstate the .pdsk image format in
order to provide this if needed.

QEMU will silently round down a disk or ROM image file to the nearest
512 bytes.  Fix by always padding .rom, .dsk and .hd images to the
nearest 512-byte boundary.

Originally-fixed-by: Stefan Hajnoczi <stefanha@gmail.com>

Allow options with dedicated BOOTP fields to fall back to using the
equivalent DHCP option if the relevant field is empty.

Add SMBIOS asset tag as a named setting.

Signed-off-by: Michael Brown <mcb30@etherboot.org>

This replaces the gdbstub's polite NAK behavior with retransmission of
the current outstanding reply packet.  It solves situations where gdb
and gPXE's gdbstub get out of sync due to the lack of flow control in
the gdb protocol spec.

Signed-off-by: Michael Brown <mcb30@etherboot.org>

The zbin compressor fixup utility rounds down file sizes before
calculating their difference.  This produces incorrect values and may
cause truncated gPXE images to be loaded at boot.

The following example explains the problem:
ilen    = 48 bytes     (uncompressed input file)
olen    = 17 bytes     (compressed output file)
divisor = 16 bytes     (paragraph granularity)
fixmeup = 3 paragraphs (value to fix up)

olen / divisor - ilen / divisor
= 1 - 3
= -2 paragraphs  (old delta calculation)

( align ( olen, divisor ) - align ( ilen, divisor ) ) / divisor
= 2 - 3
= -1 paragraphs  (new delta calculation)

If we perform the SUBx operation with old delta:
fixmeup + -2 = 1 paragraph gets loaded by the prefix

With the new delta:
fixmeup + -1 = 2 paragraphs get loaded by the prefix

The old delta calculation removes the last paragraph; the prefix will
load a truncated copy of gPXE into memory.  We need to load 2
paragraphs since olen is 17 bytes.  Loading only 1 paragraph (16
bytes) would truncate the last byte.

Signed-off-by: Michael Brown <mcb30@etherboot.org>

Using "lret $2" to return from an interrupt causes interrupts to be
disabled in the calling program, since the INT instruction will have
disabled interrupts.  Instead, patch CF on the stack and use iret to
return.

Interestingly, the original PC BIOS had this bug in at least one
place.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Michael Brown <mcb30@etherboot.org>

The "seq" command is GNU-specific; a BSD userland will not have it.
Use POSIX-conforming "awk" instead.

Reported-by: Joshua Oreman <oremanj@rwcr.net>
Suggested-by: Stefan Hajnoczi <stefanha@gmail.com>

On Mac OS X, it is necessary to build binutils manually; the system
does not provide bfd.h or the libbfd or libiberty libraries.

Originally-fixed-by: Joshua Oreman <oremanj@rwcr.net>

The Mac compiler treats "#pragma pack()" as gcc's "#pragma pack(pop)",
and so dies if the pragma pack stack is empty.  Adding a "#pragma
pack(1)" immediately beforehand is enough to keep the Mac compiler
happy.

The combination of "#pragma pack(1)", "#pragma pack()" won't actually
achieve anything on a Mac, but it will at least build.  (With gcc, the
"#pragma pack()" overrides any previous pragmas, so is still useful.)

Suggested-by: Joshua Oreman <oremanj@rwcr.net>

This is required in order to build on Mac OS X.

Modified-by: Michael Brown <mcb30@etherboot.org>
Signed-off-by: Michael Brown <mcb30@etherboot.org>

Signed-off-by: Michael Brown <mcb30@etherboot.org>

This is required in order to build on Mac OS X.

Suggested-by: Joshua Oreman <oremanj@rwcr.net>

Some builds of the GNU assembler will treat a '/' character as a
comment delimiter.  Adding "--divide" will cause it to be treated as a
division operator, as we expect.  The "--divide" option is not
available in all gas versions, so apply it only conditionally.

Suggested-by: Joshua Oreman <oremanj@rwcr.net>

prep_segment() can sometimes fail because an image requests memory
that is already in use by gPXE.  This will happen if
e.g. undionly.kpxe is used to boot memtest86; the memtest86 image is
an old-format kernel that needs to be loaded at 9000:0000, but this
area of memory may well already be in use by the underlying PXE stack.

Add a human-friendly error message, so that the cause is more
immediately visible.

Now that we have xfer_vreopen() as the default .vredirect handler,
sending redirection events can become simpler.

When handling a redirection event, we need to close the existing
connection before opening the new connection.

This allows gPXE to load memtest86, which is packaged as an old kernel.

Split all code that directly touches the kernel headers out into
bzimage_parse_header() and bzimage_update_header(), to reduce code
size and offset the cost of supporting older kernels.

Total cost of this feature: 11 bytes (uncompressed).

bin/embedded.o has a build dependency on bin/.embedded.list, which
gets generated automatically by the Makefile.  However, if the
EMBEDDED_IMAGE list is empty, bin/.embedded.list will never be
created, and so bin/embedded.o will be rebuilt every time due to a
missing dependency.

Fix by forcing bin/.embedded.list to be created even if the list is
empty.

Modified-by: Michael Brown <mcb30@etherboot.org>
Signed-off-by: Michael Brown <mcb30@etherboot.org>

Suggested-by: Bill Lortz <Bill.Lortz@premier.org>

The pcnet32 driver mismanages its RX buffers, with the result that
packets get corrupted if more than one packet arrives between calls to
poll().

Originally-fixed-by: Bill Lortz <Bill.Lortz@premier.org>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Tested-by: Stefan Hajnoczi <stefanha@gmail.com>

Also adds the MAC_ADDR_CORRECT flag, to indicate whether or not the
MAC address needs to be fixed up by the driver.

Signed-off-by: Michael Brown <mcb30@etherboot.org>

Modified-by: Michael Brown <mcb30@etherboot.org>
Signed-off-by: Michael Brown <mcb30@etherboot.org>