[malloc] Allow allocation of memory with a specified alignment offset
Allow for allocation of memory blocks having a specified offset from a
specified physical alignment, such as being 12 bytes before a 2kB
boundary.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[realtek] Force EEPROM CS low before disabling EEPROM access mode
Some RTL8169 cards seem to drive the EEPROM CS line high (i.e. active)
when 9346CR.EEM is set to "normal operating mode", with the result
that the CS line is never deasserted. The symptom of this is that the
first read from the EEPROM will work, while all subsequent reads will
return garbage data.
Reported-by: Thomas Miletich <thomas.miletich@gmail.com>
Debugged-by: Thomas Miletich <thomas.miletich@gmail.com>
Tested-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[realtek] Forcibly enable advertisement of 1000Mbps speeds
Some RTL8169 cards (observed with an RTL8169SC) power up advertising
only 100Mbps, despite being capable of 1000Mbps. Forcibly enable
advertisement of 1000Mbps on any RTL8169-like card.
This change relies on the assumption that the CTRL1000 register will
not exist on 100Mbps-only RTL8169 cards such as the RTL8101.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[realtek] Enable DAC only when built as a 64-bit binary
Some RTL8169 cards (observed with an RTL8169SC) crash and burn if DAC
is enabled, even if only 32-bit addresses are used. Observed
behaviour includes system lockups and repeated transmission of garbage
data onto the wire.
This seems to be a known problem. The Linux r8169 driver disables DAC
by default and provides a "use_dac" module parameter.
There appears to be no known test for determining whether or not DAC
will work. As a workaround, enable DAC only if we are built as as
64-bit binary. This at least eliminates the problem in the common
case of a 32-bit build, which will never use 64-bit addresses anyway.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[realtek] Use read-modify-write to check for C+ Command register
Some bits in the C+ Command register are always one. Testing for the
presence of the register must allow for this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some RTL8169 cards (observed with an RTL8169SC) power up with
TCR.MXDMA set to 16 bytes. While this does not prevent proper
operation, it almost certainly degrades performance.
Fix by explicitly setting TCR.MXDMA to "unlimited".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[realtek] Use explicit values for RCR.RXFTH and RCR.MXDMA
Some RTL8169 cards (observed with an RTL8169SC) power up with invalid
values in RCR.RXFTH and RCR.MXDMA, causing receive DMA to fail. Fix
by setting explicit values for both fields.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[realtek] Always set high dword of ring address registers
Some RTL8169 cards (observed with an RTL8169SC) power up with garbage
values in the ring address registers, and do not clear the registers
on reset.
Fix by always setting the high dword of the ring address registers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 501527d ("[http] Treat any unexpected connection close as an
error") introduced a regression causing HTTP SAN booting to fail. At
the end of the response to the HEAD request, the call to http_done()
would erroneously believe that the server had disconnected in the
middle of the HTTP headers.
Fix by treating the header block from a HEAD request as a trailer
block. This fixes the problem and also simplifies the logic in
http_rx_header().
Reported-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The FTP SIZE command allows us to get the size of a particular file,
as a consequence, we can now show proper transfer progression while
fetching a file using the FTP protocol.
Signed-off-by: Marin Hannache <git@mareo.fr>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[http] Treat any unexpected connection close as an error
iPXE currently checks that the server has not closed the connection
mid-stream (i.e. in the middle of a chunked transfer, or before the
specified Content-Length has been received), but does not check that
the server got as far as starting to send data. Consequently, if the
server closes the connection before any data is transferred (e.g. if
the server gives up waiting while iPXE performs the validation steps
for TLS), then iPXE will treat this as a successful transfer of a
zero-length file.
Fix by checking the RX connection state, and forcing an error if the
server has closed the connection at an unexpected point.
Originally-fixed-by: Marin Hannache <mareo@mareo.fr>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[util] Fix up checksum in UNDI ROM header, if present
The UNDI ROM header does contain a checksum byte. Apparently no-one
cares about this, since iPXE has left it as zero for years without
anyone noticing.
Since Option::ROM now understands the UNDI ROM header, we may as well
fix up the checksum byte for the sake of completeness.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[util] Allow for CALL NEAR in the option ROM initialisation entry point
Option::ROM currently understands only JMP NEAR and JMP SHORT
instructions in the initialisation entry point. At least one Broadcom
option ROM has been observed to use a CALL NEAR instruction.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[comboot] Accept only ".cbt" as an extension for COMBOOT images
COMBOOT images are detected by looking for a ".com" or ".cbt" filename
extension. There are widely-used files with a ".com" extension, such
as "wdsnbp.com", which are PXE images rather than COMBOOT images.
Avoid false detection of PXE images as COMBOOT images by accepting
only a ".cbt" extension as indicating a COMBOOT image.
Interestingly, this bug has been present for a long time but was
frequently concealed because the filename was truncated to fit the
fixed-length "name" field in struct image. (PXE binaries ending in
".com" tend to be related to Windows deployment products and so often
use pathnames including backslashes, which iPXE doesn't recognise as a
path separator and so treats as part of a very long filename.)
Commit 1c127a6 ("[image] Simplify image management commands and
internal API") made the image name a variable-length field, and so
exposed this flaw in the COMBOOT image detection algorithm.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[romprefix] Round up PMM allocation sizes to nearest 4kB
Some AMI BIOSes apparently break in exciting ways when asked for PMM
allocations for sizes that are not multiples of 4kB.
Fix by rounding up the image source area to the nearest 4kB. (The
temporary decompression area is already rounded up to the nearest
128kB, to facilitate sharing between multiple iPXE ROMs.)
Reported-by: Itay Gazit <itayg@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Change the DMA alignment from 4096 bytes to 16 bytes, to conserve
available DMA memory. The hardware doesn't have any specific
alignment requirements.
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Reduce CPU usage while waiting for user input. This is particularly
important for virtual machines, where CPU is a shared resource.
Reported-by: Alessandro Salvatori <alessandro@embrane.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Similarly to FreeBSD, OpenBSD requires the object format to be
specified as elf_i386_obsd rather than elf_i386.
Reported-by: Jiri B <jirib@devio.us>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[romprefix] Report a pessimistic runtime size estimate
PCI3.0 allows us to report a "runtime size" which can be smaller than
the actual ROM size. On systems that support PMM our runtime size
will be small (~2.5kB), which helps to conserve the limited option ROM
space. However, there is no guarantee that the PMM allocation will
succeed, and so we need to report the worst-case runtime size in the
PCI header.
Move the "shrunk ROM size" field from the PCI header to a new "iPXE
ROM header", allowing it to be accessed by ROM-manipulation utilities
such as disrom.pl.
Reported-by: Anton D. Kachalov <mouse@yandex-team.ru>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
gcc 4.7 produces a spurious warning about an array subscript being out
of bounds. Use a pointer dereference instead of an array lookup to
inhibit this spurious warning.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Simplify the process of booting by ensuring that old images are not
left registered after an unsuccessful autoboot attempt.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose image tail-recursion to iPXE scripts via the "--replace"
option. This functions similarly to exec() under Unix: the
currently-executing script is replaced with the new image (as opposed
to running the new image as a subroutine).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Standardise #include guard in ipxe_download.h
The script include/ipxe/efi/import.pl relies on a particular format
for the #include guard in order to detect EFI headers that are not
imported.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown