[list] Fix typographical error from previous commit
Fix typographical error from commit ea631f6 ("[list] Add
list_first_entry()"). The symptom was PXELINUX 3.86 causing a stack
overflow under VMware.
Tested-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Signed-off-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow fc_ulp_decrement() to guarantee to fc_peer_decrement() that the
peer reference remains valid for the duration of the call, by ensuring
that ulp->peer remains valid while ulp is valid.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fc] Hold reference to peers and ULPs while calling fc_link_examine()
Allow link examination methods to safely assume that their
self-reference remains valid for the duration of the method call.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[retry] Process at most one timer's expiry in each call to retry_step()
Calling a timer's expiry method may cause arbitrary consequences,
including arbitrary modifications of the list of retry timers.
list_for_each_entry_safe() guards against only deletion of the current
list entry; it provides no protection against other list
modifications. In particular, if a timer's expiry method causes the
subsequent timer in the list to be deleted, then the next loop
iteration will access a timer that may no longer exist.
This is a particularly nasty bug, since absolutely none of the
list-manipulation or reference-counting assertion checks will be
triggered. (The first assertion failure happens on the next iteration
through list_for_each_entry(), showing that the list has become
corrupted but providing no clue as to when this happened.)
Fix by stopping traversal of the list of retry timers as soon as we
hit an expired timer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There are several points in the iPXE codebase where
list_for_each_entry() is (ab)used to extract only the first entry from
a list. Add a macro list_first_entry() to make this code easier to
read.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Functions that instantiate objects generally own one reference to the
object being created. The error paths must therefore usually call
ref_put() to release this reference.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fc] Do not use the command reference number in FCP_CMND IUs
The FCP command reference number is intended to be used for
controlling precise delivery of FCP commands, rather than being an
essentially arbitrary tag field (as with iSCSI and SRP).
Use the Fibre Channel local exchange ID as the tag for FCP commands,
instead of the FCP command reference. The local exchange ID does not
appear within the FCP IU itself, but does appear within the FC frame
header; debug traces can therefore still be correlated with packet
captures.
Reported-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[iscsi] Ensure ISID is consistent within an iSCSI session
Commit 5f4ab0d ("[iscsi] Randomise a portion of the ISID to force new
session instantiation") introduced a regression by randomising the
ISID on each call to iscsi_start_login(), which may be called more
than once per connection, rather than on each call to
iscsi_open_connection(), which is guaranteed to be called only once
per connection. This is incorrect behaviour that causes our
connection to be rejected by some iSCSI targets (observed with a
COMSTAR target under OpenSolaris).
Fix by generating the ISID in iscsi_open_connection(), and storing the
randomised ISID as part of the session state.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[iscsi] Randomise a portion of the ISID to force new session instantiation
When a connection to an iSCSI target is broken without gracefully
closing the TCP socket, a subsequent connection attempt may fail
because the target believes that we are attempting session
reinstatement (see RFC3720 section 5.3.1). This has been observed
using the Microsoft iSCSI target.
Section 9.1.1 of RFC3720 states that initiators should use a stable
ISID, however section 5.3.1 shows that the only way to explicitly
request that a new session be created is to use a new ISID.
Fix by randomising the "qualifier" portion of the ISID.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fcoe] Request SPMA iff FIP advertisement indicates support for SPMA
We currently set both the FP and SP bits in our FIP FLOGI, to allow
the FCF the choice of selecting either a fabric-provided or a server-
provided MAC address. This complies with the FCoE specification, but
has been observed to result in an FLOGI rejection from some FCFs.
Fix by recording whether or not the FCF supports SPMA, and requesting
only one of FPMA or SPMA in our FIP FLOGI. We choose to prefer SPMA
where available, because many iPXE drivers will not be able to receive
unicast packets sent to a non-default MAC address.
Reported-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Include session state metadata in packet traces
(Ab)use the "secs" field in transmitted DHCP packets to convey
metadata about the DHCP session state. In particular:
bit 0 represents the receipt of a ProxyDHCPOFFER
bit 1 represents the receipt of a DHCPOFFER
bits 2+ represent the transmitted packet sequence number
This allows some relevant information about the internal state of the
DHCP session to be read out from a packet trace from a non-debug build
of iPXE. It also potentially allows replies to be correlated to their
requests (for servers that copy the "secs" field from request to
reply).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Omit ProxyDHCPREQUEST if PXE options are present in ProxyDHCPOFFER
Some ProxyDHCP implementations seem to violate the PXE specification
by expecting the client to retain options from the ProxyDHCPOFFER
rather than issuing a separate ProxyDHCPREQUEST.
Work around such broken clients by retaining the ProxyDHCPOFFER
packet, and proceeding to a ProxyDHCPREQUEST only if the
ProxyDHCPOFFER does not already contain PXE options.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A recent patch series breaks compatibility with various common DHCP
implementations.
Revert "[dhcp] Don't consider invalid offers to be duplicates"
This reverts commit 905ea56753.
Revert "[dhcp] Honor PXEBS_SKIP option in discovery control"
This reverts commit 620b98ee4b.
Revert "[dhcp] Keep multiple DHCP offers received, and use them intelligently"
This reverts commit 5efc2fcb60.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fc] Update ELS port IDs when receiving an ELS frame
The port ID assigned by the FLOGI response is implicit in the
destination ID used for the response (which will differ from the
source ID used for the corresponding request).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Pass both link-layer addresses in net_tx() and net_rx()
FCoE requires the use of fabric-provided MAC addresses, which breaks
the assumption that the net device's MAC address is implicitly the
source address for net_tx() and the (unicast) destination address for
net_rx().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[aoe] Fail immediately when network device is closed
Avoid a tedious timeout delay when attempting to issue a command over
a network device that has been closed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fc] Allow FLOGI response to be sent to newly-assigned peer port ID
The response to a received FLOGI should probably be sent to the peer
port ID assigned as a result of the WWPN comparison.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[infiniband] Add node GUID as distinct from the first port GUID
iPXE currently uses the first port's port GUID as the node GUID,
rather than using the (possibly distinct) real node GUID. This can
confuse opensm during the handover to a loaded OS: it thinks the port
already belongs to a different node and so discards our port
information with a warning message about duplicate ports. Everything
is picked up correctly on the second subnet sweep, after opensm has
established that the "old" node no longer exists, but this can delay
link-up unnecessarily by several seconds.
Fix by using the real node GUID.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[infiniband] Always call ib_link_state_changed() in ib_smc_update()
ib_smc_update() potentially updates the Infiniband port state, and so
should almost always be followed by a call to ib_link_state_changed().
The one exception is the call made to ib_smc_update() before the
device is registered.
Fix by removing explicit calls to ib_link_state_changed() from drivers
using ib_smc_update(), including a call to ib_link_state_changed()
within ib_smc_update(), and creating a separate ib_smc_init() for use
prior to device registration.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fcoe] Disambiguate the various error cases and add a CRC failure message
It seems as though several drivers neglect to strip the Ethernet CRC,
which will cause the FCoE footer to be misplaced and result
(coincidentally) in an "invalid CRC" error from FCoE.
Add a human-visible message indicating this, to aid in diagnosis.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Report network-layer errors via network device statistics
Errors generated by the network layer in response to received packets
are liable to be lost, since nothing systematically records these
errors and often the packets do not propagate far enough through the
stack to impact upon user-visible processes.
Improve this situation by recording network-layer errors in the
network device statistics.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The Fibre Channel Protocol provides a mechanism for transporting SCSI
commands via a Fibre Channel fabric.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add support for Fibre Channel ports, peers, and upper-layer protocols,
and for Fibre Channel extended link services.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[block] Replace gPXE block-device API with an iPXE asynchronous interface
The block device interface used in gPXE predates the invention of even
the old gPXE data-transfer interface, let alone the current iPXE
generic asynchronous interface mechanism. Bring this old code up to
date, with the following benefits:
o Block device commands can be cancelled by the requestor. The INT 13
layer uses this to provide a global timeout on all INT 13 calls,
with the result that an unexpected passive failure mode (such as
an iSCSI target ACKing the request but never sending a response)
will lead to a timeout that gets reported back to the INT 13 user,
rather than simply freezing the system.
o INT 13,00 (reset drive) is now able to reset the underlying block
device. INT 13 users, such as DOS, that use INT 13,00 as a method
for error recovery now have a chance of recovering.
o All block device commands are tagged, with a numerical tag that
will show up in debugging output and in packet captures; this will
allow easier interpretation of bug reports that include both
sources of information.
o The extremely ugly hacks used to generate the boot firmware tables
have been eradicated and replaced with a generic acpi_describe()
method (exploiting the ability of iPXE interfaces to pass through
methods to an underlying interface). The ACPI tables are now
built in a shared data block within .bss16, rather than each
requiring dedicated space in .data16.
o The architecture-independent concept of a SAN device has been
exposed to the iPXE core through the sanboot API, which provides
calls to hook, unhook, boot, and describe SAN devices. This
allows for much more flexible usage patterns (such as hooking an
empty SAN device and then running an OS installer via TFTP).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[infiniband] Add the concept of an Infiniband upper-layer driver
Replace the explicit calls from the Infiniband core to the IPoIB layer
with the general concept of an Infiniband upper-layer driver
(analogous to a PCI driver) which can create arbitrary devices on top
of Infiniband devices.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Add the concept of a network upper-layer driver
Add the concept of a network upper-layer driver, which can create
arbitrary devices on top of network devices.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[retry] Hold reference while timer is running and during expiry callback
Guarantee that a retry timer cannot go out of scope while the timer is
running, and provide a guarantee to the expiry callback that the timer
will remain in scope during the entire callback (similar to the
guarantee provided to interface methods).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown