[hermon] Add BOFM support

Signed-off-by: Michael Brown <mcb30@ipxe.org>

src/drivers/infiniband/MT25408_PRM.h

 /* MOD_STAT_CFG            #### michal - gdror fix */
 
 struct hermonprm_mod_stat_cfg_st {	/* Little Endian */
-    pseudo_bit_t	reserved0[0x00010];
+    pseudo_bit_t	log_pg_sz[0x00008];
+    pseudo_bit_t	log_pg_sz_m[0x00001];
+    pseudo_bit_t	reserved0[0x00005];
+    pseudo_bit_t	dife[0x00001];
+    pseudo_bit_t	dife_m[0x00001];
     pseudo_bit_t	rx_options[0x00004];   /* number of RX options to sweep when doing SerDes parameters AutoNegotiation. */
     pseudo_bit_t	reserved1[0x00003];
     pseudo_bit_t	rx_options_m[0x00001]; /* Modify rx_options */
     pseudo_bit_t	reserved2[0x00003];
     pseudo_bit_t	tx_options_m[0x00001]; /* Modify tx_options */
 /* -------------- */
-    pseudo_bit_t	reserved3[0x00020];
+    pseudo_bit_t	reserved3[0x00010];
+    pseudo_bit_t	qdr_rx_options[0x00004];
+    pseudo_bit_t	reserved4[0x00003];
+    pseudo_bit_t	qdr_rx_options_m[0x00001];
+    pseudo_bit_t	qdr_tx_options[0x00004];
+    pseudo_bit_t	reserved5[0x00003];
+    pseudo_bit_t	qdr_tx_options_m[0x00001];
 /* -------------- */
-    pseudo_bit_t	pre_amp[0x00004];      /* Pre Amplitude */
-    pseudo_bit_t	pre_emp_pre_amp[0x00004];
-    pseudo_bit_t	pre_emp_out[0x00004];  /* Pre Emphasis Out */
-    pseudo_bit_t	voltage[0x00004];
-    pseudo_bit_t	equ[0x00004];          /* Equalization */
-    pseudo_bit_t	reserved4[0x0000b];
-    pseudo_bit_t	serdes_m[0x00001];     /* Modify serdes parameters */
+    pseudo_bit_t	reserved6[0x00020];
 /* -------------- */
     pseudo_bit_t	lid[0x00010];          /* default LID */
     pseudo_bit_t	lid_m[0x00001];        /* Modify default LID */
-    pseudo_bit_t	reserved5[0x00003];
+    pseudo_bit_t	reserved7[0x00003];
     pseudo_bit_t	port_en[0x00001];      /* enable port (E_Key) */
     pseudo_bit_t	port_en_m[0x00001];    /* Modify  port_en */
-    pseudo_bit_t	reserved6[0x0000a];
+    pseudo_bit_t	reserved8[0x00002];
+    pseudo_bit_t	port_pause_mode[0x00002];
+    pseudo_bit_t	reserved9[0x00001];
+    pseudo_bit_t	port_pause_mode_m[0x00001];
+    pseudo_bit_t	reserved10[0x00004];
 /* -------------- */
-    pseudo_bit_t	reserved7[0x0001f];
+    pseudo_bit_t	reserved11[0x0001f];
     pseudo_bit_t	guid_hi_m[0x00001];    /* Modify guid_hi */
 /* -------------- */
     pseudo_bit_t	guid_hi[0x00020];
 /* -------------- */
-    pseudo_bit_t	reserved8[0x0001f];
+    pseudo_bit_t	reserved12[0x0001f];
     pseudo_bit_t	guid_lo_m[0x00001];    /* Modify guid_lo */
 /* -------------- */
     pseudo_bit_t	guid_lo[0x00020];
 /* -------------- */
-    pseudo_bit_t	reserved9[0x0001f];
+    pseudo_bit_t	reserved13[0x0001f];
     pseudo_bit_t	nodeguid_hi_m[0x00001];
 /* -------------- */
     pseudo_bit_t	nodeguid_hi[0x00020];
 /* -------------- */
-    pseudo_bit_t	reserved10[0x0001f];
+    pseudo_bit_t	reserved14[0x0001f];
     pseudo_bit_t	nodeguid_lo_m[0x00001];
 /* -------------- */
     pseudo_bit_t	nodeguid_lo[0x00020];
 /* -------------- */
-    pseudo_bit_t	reserved11[0x00680];
+    pseudo_bit_t	ob_preemp_pre[0x00005];
+    pseudo_bit_t	reserved15[0x00003];
+    pseudo_bit_t	ob_preemp_post[0x00005];
+    pseudo_bit_t	reserved16[0x00003];
+    pseudo_bit_t	ob_preemp_main[0x00005];
+    pseudo_bit_t	reserved17[0x00003];
+    pseudo_bit_t	ob_preemp[0x00005];
+    pseudo_bit_t	reserved18[0x00002];
+    pseudo_bit_t	serdes_m[0x00001];
 /* -------------- */
-}; 
+    pseudo_bit_t	inbuf_ind_en[0x00003];
+    pseudo_bit_t	reserved19[0x00001];
+    pseudo_bit_t	sd_main[0x00004];
+    pseudo_bit_t	reserved20[0x00004];
+    pseudo_bit_t	sd_equal[0x00004];
+    pseudo_bit_t	reserved21[0x00004];
+    pseudo_bit_t	sd_mux_main[0x00002];
+    pseudo_bit_t	reserved22[0x00002];
+    pseudo_bit_t	mux_eq[0x00002];
+    pseudo_bit_t	reserved23[0x00002];
+    pseudo_bit_t	sigdet_th[0x00003];
+    pseudo_bit_t	reserved24[0x00001];
+/* -------------- */
+    pseudo_bit_t	reserved25[0x00040];
+/* -------------- */
+    pseudo_bit_t	port_protocol[0x00008];
+    pseudo_bit_t	port_dual[0x00001];
+    pseudo_bit_t	reserved26[0x00006];
+    pseudo_bit_t	port_protocol_m[0x00001];
+    pseudo_bit_t	num_port[0x00008];
+    pseudo_bit_t	reserved27[0x00008];
+/* -------------- */
+    pseudo_bit_t	port_protocol_vpi[0x00008];
+    pseudo_bit_t	reserved28[0x00018];
+/* -------------- */
+    pseudo_bit_t	reserved29[0x00180];
+/* -------------- */
+    pseudo_bit_t	fw_rev_major[0x00010];
+    pseudo_bit_t	reserved30[0x0000f];
+    pseudo_bit_t	fw_rev_support[0x00001];
+/* -------------- */
+    pseudo_bit_t	fw_rev_minor[0x00010];
+    pseudo_bit_t	fw_rev_subminor[0x00010];
+/* -------------- */
+    pseudo_bit_t	cmd_interface_rev[0x00010];
+    pseudo_bit_t	reserved31[0x00010];
+/* -------------- */
+    pseudo_bit_t	reserved32[0x00060];
+/* -------------- */
+    pseudo_bit_t	mac_high[0x00010];
+    pseudo_bit_t	reserved33[0x0000f];
+    pseudo_bit_t	mac_m[0x00001];
+/* -------------- */
+    pseudo_bit_t	mac_low[0x00020];
+/* -------------- */
+    pseudo_bit_t	reserved34[0x00010];
+    pseudo_bit_t	num_veps[0x00008];
+    pseudo_bit_t	num_vep_groups[0x00008];
+/* -------------- */
+    pseudo_bit_t	reserved35[0x00020];
+/* -------------- */
+    pseudo_bit_t	reserved36[0x00018];
+    pseudo_bit_t	outer_vlan_en[0x00001];
+    pseudo_bit_t	reserved37[0x00002];
+    pseudo_bit_t	outer_vlan_en_m[0x00001];
+    pseudo_bit_t	port_net_boot[0x00001];
+    pseudo_bit_t	reserved38[0x00002];
+    pseudo_bit_t	port_net_boot_m[0x00001];
+/* -------------- */
+    pseudo_bit_t	reserved39[0x00060];
+/* -------------- */
+    pseudo_bit_t	port_eth_mode_capability[0x0001f];
+    pseudo_bit_t	reserved40[0x00001];
+/* -------------- */
+    pseudo_bit_t	port_eth_mode_enabled[0x0001f];
+    pseudo_bit_t	port_eth_mod_m[0x00001];
+/* -------------- */
+    pseudo_bit_t	port_eth_mode_current[0x0001f];
+    pseudo_bit_t	reserved41[0x00001];
+/* -------------- */
+    pseudo_bit_t	reserved42[0x00220];
+};
 
 /* SRQ Context */
 

src/drivers/infiniband/hermon.c

 #include <ipxe/ethernet.h>
 #include <ipxe/fcoe.h>
 #include <ipxe/vlan.h>
+#include <ipxe/bofm.h>
 #include "hermon.h"
 
 /**
 			    0, gid, 0, hash );
 }
 
+static inline int
+hermon_cmd_mod_stat_cfg ( struct hermon *hermon, unsigned int mode,
+			  unsigned int input_mod,
+			  struct hermonprm_scalar_parameter *portion ) {
+	return hermon_cmd ( hermon,
+			    HERMON_HCR_INOUT_CMD ( HERMON_HCR_MOD_STAT_CFG,
+						   0, sizeof ( *portion ),
+						   0, sizeof ( *portion ) ),
+			    mode, portion, input_mod, portion );
+}
+
 static inline int
 hermon_cmd_query_port ( struct hermon *hermon, unsigned int port,
 			struct hermonprm_query_port_cap *query_port ) {
 			      mtt->num_pages );
 }
 
+/***************************************************************************
+ *
+ * Static configuration operations
+ *
+ ***************************************************************************
+ */
+
+/**
+ * Calculate offset within static configuration
+ *
+ * @v field		Field
+ * @ret offset		Offset
+ */
+#define HERMON_MOD_STAT_CFG_OFFSET( field )				     \
+	( ( MLX_BIT_OFFSET ( struct hermonprm_mod_stat_cfg_st, field ) / 8 ) \
+	  & ~( sizeof ( struct hermonprm_scalar_parameter ) - 1 ) )
+
+/**
+ * Query or modify static configuration
+ *
+ * @v hermon		Hermon device
+ * @v port		Port
+ * @v mode		Command mode
+ * @v offset		Offset within static configuration
+ * @v stat_cfg		Static configuration
+ * @ret rc		Return status code
+ */
+static int hermon_mod_stat_cfg ( struct hermon *hermon, unsigned int port,
+				 unsigned int mode, unsigned int offset,
+				 struct hermonprm_mod_stat_cfg *stat_cfg ) {
+	struct hermonprm_scalar_parameter *portion =
+		( ( void * ) &stat_cfg->u.bytes[offset] );
+	struct hermonprm_mod_stat_cfg_input_mod mod;
+	int rc;
+
+	/* Sanity check */
+	assert ( ( offset % sizeof ( *portion ) ) == 0 );
+
+	/* Construct input modifier */
+	memset ( &mod, 0, sizeof ( mod ) );
+	MLX_FILL_2 ( &mod, 0,
+		     portnum, port,
+		     offset, offset );
+
+	/* Issue command */
+	if ( ( rc = hermon_cmd_mod_stat_cfg ( hermon, mode,
+					      be32_to_cpu ( mod.u.dwords[0] ),
+					      portion ) ) != 0 )
+		return rc;
+
+	return 0;
+}
+
 /***************************************************************************
  *
  * MAD operations
 	hermon->icm = UNULL;
 }
 
+/***************************************************************************
+ *
+ * BOFM interface
+ *
+ ***************************************************************************
+ */
+
+/**
+ * Harvest Ethernet MAC for BOFM
+ *
+ * @v bofm		BOFM device
+ * @v mport		Multi-port index
+ * @v mac		MAC to fill in
+ * @ret rc		Return status code
+ */
+static int hermon_bofm_harvest ( struct bofm_device *bofm, unsigned int mport,
+				 uint8_t *mac ) {
+	struct hermon *hermon = container_of ( bofm, struct hermon, bofm );
+	struct hermonprm_mod_stat_cfg stat_cfg;
+	union {
+		uint8_t bytes[8];
+		uint32_t dwords[2];
+	} buf;
+	int rc;
+
+	/* Query static configuration */
+	if ( ( rc = hermon_mod_stat_cfg ( hermon, mport,
+					  HERMON_MOD_STAT_CFG_QUERY,
+					  HERMON_MOD_STAT_CFG_OFFSET ( mac_m ),
+					  &stat_cfg ) ) != 0 ) {
+		DBGC ( hermon, "Hermon %p port %d could not query "
+		       "configuration: %s\n", hermon, mport, strerror ( rc ) );
+		return rc;
+	}
+
+	/* Retrieve MAC address */
+	buf.dwords[0] = htonl ( MLX_GET ( &stat_cfg, mac_high ) );
+	buf.dwords[1] = htonl ( MLX_GET ( &stat_cfg, mac_low ) );
+	memcpy ( mac, &buf.bytes[ sizeof ( buf.bytes ) - ETH_ALEN ],
+		 ETH_ALEN );
+
+	DBGC ( hermon, "Hermon %p port %d harvested MAC address %s\n",
+	       hermon, mport, eth_ntoa ( mac ) );
+
+	return 0;
+}
+
+/**
+ * Update Ethernet MAC for BOFM
+ *
+ * @v bofm		BOFM device
+ * @v mport		Multi-port index
+ * @v mac		MAC to fill in
+ * @ret rc		Return status code
+ */
+static int hermon_bofm_update ( struct bofm_device *bofm, unsigned int mport,
+				const uint8_t *mac ) {
+	struct hermon *hermon = container_of ( bofm, struct hermon, bofm );
+	struct hermonprm_mod_stat_cfg stat_cfg;
+	union {
+		uint8_t bytes[8];
+		uint32_t dwords[2];
+	} buf;
+	int rc;
+
+	/* Prepare MAC address */
+	memset ( &buf, 0, sizeof ( buf ) );
+	memcpy ( &buf.bytes[ sizeof ( buf.bytes ) - ETH_ALEN ], mac,
+		 ETH_ALEN );
+
+	/* Modify static configuration */
+	memset ( &stat_cfg, 0, sizeof ( stat_cfg ) );
+	MLX_FILL_2 ( &stat_cfg, 36,
+		     mac_m, 1,
+		     mac_high, ntohl ( buf.dwords[0] ) );
+	MLX_FILL_1 ( &stat_cfg, 37, mac_low, ntohl ( buf.dwords[1] ) );
+	if ( ( rc = hermon_mod_stat_cfg ( hermon, mport,
+					  HERMON_MOD_STAT_CFG_SET,
+					  HERMON_MOD_STAT_CFG_OFFSET ( mac_m ),
+					  &stat_cfg ) ) != 0 ) {
+		DBGC ( hermon, "Hermon %p port %d could not modify "
+		       "configuration: %s\n", hermon, mport, strerror ( rc ) );
+		return rc;
+	}
+
+	DBGC ( hermon, "Hermon %p port %d updated MAC address to %s\n",
+	       hermon, mport, eth_ntoa ( mac ) );
+
+	return 0;
+}
+
+/** Hermon BOFM operations */
+static struct bofm_operations hermon_bofm_operations = {
+	.harvest = hermon_bofm_harvest,
+	.update = hermon_bofm_update,
+};
+
 /***************************************************************************
  *
  * PCI interface
 	pci_restore ( pci, &backup, backup_exclude );
 }
 
+/**
+ * Allocate Hermon device
+ *
+ * @v pci		PCI device
+ * @v id		PCI ID
+ * @ret rc		Return status code
+ */
+static struct hermon * hermon_alloc ( void ) {
+	struct hermon *hermon;
+
+	/* Allocate Hermon device */
+	hermon = zalloc ( sizeof ( *hermon ) );
+	if ( ! hermon )
+		goto err_hermon;
+
+	/* Allocate space for mailboxes */
+	hermon->mailbox_in = malloc_dma ( HERMON_MBOX_SIZE,
+					  HERMON_MBOX_ALIGN );
+	if ( ! hermon->mailbox_in )
+		goto err_mailbox_in;
+	hermon->mailbox_out = malloc_dma ( HERMON_MBOX_SIZE,
+					   HERMON_MBOX_ALIGN );
+	if ( ! hermon->mailbox_out )
+		goto err_mailbox_out;
+
+	return hermon;
+
+	free_dma ( hermon->mailbox_out, HERMON_MBOX_SIZE );
+ err_mailbox_out:
+	free_dma ( hermon->mailbox_in, HERMON_MBOX_SIZE );
+ err_mailbox_in:
+	free ( hermon );
+ err_hermon:
+	return NULL;
+}
+
+/**
+ * Free Hermon device
+ *
+ * @v hermon		Hermon device
+ */
+static void hermon_free ( struct hermon *hermon ) {
+
+	free_dma ( hermon->mailbox_out, HERMON_MBOX_SIZE );
+	free_dma ( hermon->mailbox_in, HERMON_MBOX_SIZE );
+	free ( hermon );
+}
+
+/**
+ * Initialise Hermon PCI parameters
+ *
+ * @v hermon		Hermon device
+ * @v pci		PCI device
+ */
+static void hermon_pci_init ( struct hermon *hermon, struct pci_device *pci ) {
+
+	/* Fix up PCI device */
+	adjust_pci_device ( pci );
+
+	/* Get PCI BARs */
+	hermon->config = ioremap ( pci_bar_start ( pci, HERMON_PCI_CONFIG_BAR),
+				   HERMON_PCI_CONFIG_BAR_SIZE );
+	hermon->uar = ioremap ( pci_bar_start ( pci, HERMON_PCI_UAR_BAR ),
+				HERMON_UAR_NON_EQ_PAGE * HERMON_PAGE_SIZE );
+}
+
 /**
  * Probe PCI device
  *
 	int rc;
 
 	/* Allocate Hermon device */
-	hermon = zalloc ( sizeof ( *hermon ) );
+	hermon = hermon_alloc();
 	if ( ! hermon ) {
 		rc = -ENOMEM;
-		goto err_alloc_hermon;
+		goto err_alloc;
 	}
 	pci_set_drvdata ( pci, hermon );
 
-	/* Fix up PCI device */
-	adjust_pci_device ( pci );
-
-	/* Get PCI BARs */
-	hermon->config = ioremap ( pci_bar_start ( pci, HERMON_PCI_CONFIG_BAR),
-				   HERMON_PCI_CONFIG_BAR_SIZE );
-	hermon->uar = ioremap ( pci_bar_start ( pci, HERMON_PCI_UAR_BAR ),
-				HERMON_UAR_NON_EQ_PAGE * HERMON_PAGE_SIZE );
+	/* Initialise PCI parameters */
+	hermon_pci_init ( hermon, pci );
 
 	/* Reset device */
 	hermon_reset ( hermon, pci );
 
-	/* Allocate space for mailboxes */
-	hermon->mailbox_in = malloc_dma ( HERMON_MBOX_SIZE,
-					  HERMON_MBOX_ALIGN );
-	if ( ! hermon->mailbox_in ) {
-		rc = -ENOMEM;
-		goto err_mailbox_in;
-	}
-	hermon->mailbox_out = malloc_dma ( HERMON_MBOX_SIZE,
-					   HERMON_MBOX_ALIGN );
-	if ( ! hermon->mailbox_out ) {
-		rc = -ENOMEM;
-		goto err_mailbox_out;
-	}
-
 	/* Start firmware */
 	if ( ( rc = hermon_start_firmware ( hermon ) ) != 0 )
 		goto err_start_firmware;
  err_get_cap:
 	hermon_stop_firmware ( hermon );
  err_start_firmware:
-	free_dma ( hermon->mailbox_out, HERMON_MBOX_SIZE );
- err_mailbox_out:
-	free_dma ( hermon->mailbox_in, HERMON_MBOX_SIZE );
- err_mailbox_in:
-	free ( hermon );
- err_alloc_hermon:
+	hermon_free ( hermon );
+ err_alloc:
 	return rc;
 }
 
 	hermon_free_icm ( hermon );
 	hermon_stop_firmware ( hermon );
 	hermon_stop_firmware ( hermon );
-	free_dma ( hermon->mailbox_out, HERMON_MBOX_SIZE );
-	free_dma ( hermon->mailbox_in, HERMON_MBOX_SIZE );
 	for ( i = ( hermon->cap.num_ports - 1 ) ; i >= 0 ; i-- ) {
 		netdev_nullify ( hermon->port[i].netdev );
 		netdev_put ( hermon->port[i].netdev );
 	}
 	for ( i = ( hermon->cap.num_ports - 1 ) ; i >= 0 ; i-- )
 		ibdev_put ( hermon->port[i].ibdev );
-	free ( hermon );
+	hermon_free ( hermon );
+}
+
+/**
+ * Probe PCI device for BOFM
+ *
+ * @v pci		PCI device
+ * @v id		PCI ID
+ * @ret rc		Return status code
+ */
+static int hermon_bofm_probe ( struct pci_device *pci ) {
+	struct hermon *hermon;
+	int rc;
+
+	/* Allocate Hermon device */
+	hermon = hermon_alloc();
+	if ( ! hermon ) {
+		rc = -ENOMEM;
+		goto err_alloc;
+	}
+	pci_set_drvdata ( pci, hermon );
+
+	/* Initialise PCI parameters */
+	hermon_pci_init ( hermon, pci );
+
+	/* Initialise BOFM device */
+	bofm_init ( &hermon->bofm, pci, &hermon_bofm_operations );
+
+	/* Register BOFM device */
+	if ( ( rc = bofm_register ( &hermon->bofm ) ) != 0 ) {
+		DBGC ( hermon, "Hermon %p could not register BOFM device: "
+		       "%s\n", hermon, strerror ( rc ) );
+		goto err_bofm_register;
+	}
+
+	return 0;
+
+ err_bofm_register:
+	hermon_free ( hermon );
+ err_alloc:
+	return rc;
+}
+
+/**
+ * Remove PCI device for BOFM
+ *
+ * @v pci		PCI device
+ */
+static void hermon_bofm_remove ( struct pci_device *pci ) {
+	struct hermon *hermon = pci_get_drvdata ( pci );
+
+	bofm_unregister ( &hermon->bofm );
+	hermon_free ( hermon );
 }
 
 static struct pci_device_id hermon_nics[] = {
 	.probe = hermon_probe,
 	.remove = hermon_remove,
 };
+
+struct pci_driver hermon_bofm_driver __bofm_driver = {
+	.ids = hermon_nics,
+	.id_count = ( sizeof ( hermon_nics ) / sizeof ( hermon_nics[0] ) ),
+	.probe = hermon_bofm_probe,
+	.remove = hermon_bofm_remove,
+};

src/drivers/infiniband/hermon.h

 #include <stdint.h>
 #include <ipxe/uaccess.h>
 #include <ipxe/ib_packet.h>
+#include <ipxe/bofm.h>
 #include "mlx_bitops.h"
 #include "MT25408_PRM.h"
 
 
 #define HERMON_RETRY_MAX		0x07
 
+#define HERMON_MOD_STAT_CFG_SET		0x01
+#define HERMON_MOD_STAT_CFG_QUERY	0x03
+
 /*
  * Datatypes that seem to be missing from the autogenerated documentation
  *
 /* -------------- */
 } __attribute__ (( packed ));
 
-struct hermonprm_mod_stat_cfg_pf_net_boot_st {
-	pseudo_bit_t reserved1[0x0001c];
-	pseudo_bit_t pf_net_boot[0x00001];
-	pseudo_bit_t reserved2[0x00002];
-	pseudo_bit_t pf_net_boot_m[0x00001];
-/* -------------- */
-	pseudo_bit_t reserved0[0x00020];
+struct hermonprm_mod_stat_cfg_input_mod_st {
+	pseudo_bit_t offset[0x00008];
+	pseudo_bit_t portnum[0x00008];
+	pseudo_bit_t xnum[0x00004];
+	pseudo_bit_t linkspeed[0x00003];
+	pseudo_bit_t autoneg[0x00001];
+	pseudo_bit_t reserved[0x00004];
+	pseudo_bit_t setup_mode[0x00004];
 } __attribute__ (( packed ));
 
 /*
 struct MLX_DECLARE_STRUCT ( hermonprm_mad_ifc );
 struct MLX_DECLARE_STRUCT ( hermonprm_mcg_entry );
 struct MLX_DECLARE_STRUCT ( hermonprm_mgm_hash );
-struct MLX_DECLARE_STRUCT ( hermonprm_mod_stat_cfg_pf_net_boot );
+struct MLX_DECLARE_STRUCT ( hermonprm_mod_stat_cfg );
+struct MLX_DECLARE_STRUCT ( hermonprm_mod_stat_cfg_input_mod );
 struct MLX_DECLARE_STRUCT ( hermonprm_mpt );
 struct MLX_DECLARE_STRUCT ( hermonprm_mtt );
 struct MLX_DECLARE_STRUCT ( hermonprm_port_state_change_event );
 
 	/** Ports */
 	struct hermon_port port[HERMON_MAX_PORTS];
+
+	/** BOFM device */
+	struct bofm_device bofm;
 };
 
 /** Global protection domain */