[librm] Rename prot_call() to virt_call()

Signed-off-by: Michael Brown <mcb30@ipxe.org>

src/arch/x86/include/librm.h

@@ -58,7 +58,7 @@ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
  */
 .macro virtcall function
 	pushl	$VIRTUAL(\function)
-	call	prot_call
+	call	virt_call
 .endm
 
 #else /* ASSEMBLY */
@@ -76,7 +76,7 @@ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
  */
 #define VIRT_CALL( function )						\
 	"pushl $( " _S2 ( VIRTUAL ( function ) ) " )\n\t"		\
-	"call prot_call\n\t"
+	"call virt_call\n\t"
 
 /* Variables in librm.S */
 extern const unsigned long virt_offset;

src/arch/x86/include/registers.h

@@ -167,7 +167,7 @@ struct i386_seg_regs {
  *
  * @endcode
  *
- * prot_call() and kir_call() create this data structure on the stack
+ * virt_call() and kir_call() create this data structure on the stack
  * and pass in a pointer to this structure.
  *
  */

src/arch/x86/transitions/librm.S

@@ -640,19 +640,19 @@ intr_to_prot:
 	.equ	_intr_to_virt, intr_to_prot
 
 /****************************************************************************
- * prot_call (real-mode near call, 16-bit real-mode near return address)
+ * virt_call (real-mode near call, 16-bit real-mode near return address)
  *
  * Call a specific C function in the protected-mode code.  The
  * prototype of the C function must be
  *   void function ( struct i386_all_regs *ix86 ); 
  * ix86 will point to a struct containing the real-mode registers
- * at entry to prot_call.  
+ * at entry to virt_call().
  *
- * All registers will be preserved across prot_call(), unless the C
+ * All registers will be preserved across virt_call(), unless the C
  * function explicitly overwrites values in ix86.  Interrupt status
  * and GDT will also be preserved.  Gate A20 will be enabled.
  *
- * Note that prot_call() does not rely on the real-mode stack
+ * Note that virt_call() does not rely on the real-mode stack
  * remaining intact in order to return, since everything relevant is
  * copied to the protected-mode stack for the duration of the call.
  * In particular, this means that a real-mode prefix can make a call
@@ -666,26 +666,26 @@ intr_to_prot:
  *
  * Example usage:
  *	pushl	$pxe_api_call
- *	call	prot_call
+ *	call	virt_call
  * to call in to the C function
  *      void pxe_api_call ( struct i386_all_regs *ix86 );
  ****************************************************************************
  */
 	.struct	0
-PC_OFFSET_GDT:		.space	6
-PC_OFFSET_IDT:		.space	6
-PC_OFFSET_IX86:		.space	SIZEOF_I386_ALL_REGS
-PC_OFFSET_PADDING:	.space	2 /* for alignment */
-PC_OFFSET_RETADDR:	.space	2
-PC_OFFSET_PARAMS:
-PC_OFFSET_FUNCTION:	.space	4
-PC_OFFSET_END:
+VC_OFFSET_GDT:		.space	6
+VC_OFFSET_IDT:		.space	6
+VC_OFFSET_IX86:		.space	SIZEOF_I386_ALL_REGS
+VC_OFFSET_PADDING:	.space	2 /* for alignment */
+VC_OFFSET_RETADDR:	.space	2
+VC_OFFSET_PARAMS:
+VC_OFFSET_FUNCTION:	.space	4
+VC_OFFSET_END:
 	.previous
 
-	.section ".text16.prot_call", "ax", @progbits
+	.section ".text16.virt_call", "ax", @progbits
 	.code16
-	.globl prot_call
-prot_call:
+	.globl virt_call
+virt_call:
 	/* Preserve registers, flags and GDT on external RM stack */
 	pushfw	/* padding */
 	pushfl
@@ -696,37 +696,37 @@ prot_call:
 	pushw	%ds
 	pushw	%ss
 	pushw	%cs
-	subw	$PC_OFFSET_IX86, %sp
+	subw	$VC_OFFSET_IX86, %sp
 	movw	%sp, %bp
-	sidt	PC_OFFSET_IDT(%bp)
-	sgdt	PC_OFFSET_GDT(%bp)
+	sidt	VC_OFFSET_IDT(%bp)
+	sgdt	VC_OFFSET_GDT(%bp)
 
 	/* For sanity's sake, clear the direction flag as soon as possible */
 	cld
 
 	/* Switch to protected mode and move register dump to PM stack */
-	movl	$PC_OFFSET_END, %ecx
-	pushl	$VIRTUAL(pc_pmode)
+	movl	$VC_OFFSET_END, %ecx
+	pushl	$VIRTUAL(vc_pmode)
 	jmp	real_to_prot
-	.section ".text.prot_call", "ax", @progbits
+	.section ".text.virt_call", "ax", @progbits
 	.code32
-pc_pmode:
+vc_pmode:
 	/* Call function */
-	leal	PC_OFFSET_IX86(%esp), %eax
+	leal	VC_OFFSET_IX86(%esp), %eax
 	pushl	%eax
-	call	*(PC_OFFSET_FUNCTION+4)(%esp)
+	call	*(VC_OFFSET_FUNCTION+4)(%esp)
 	popl	%eax /* discard */
 
 	/* Switch to real mode and move register dump back to RM stack */
-	movl	$PC_OFFSET_END, %ecx
+	movl	$VC_OFFSET_END, %ecx
 	movl	%esp, %esi
-	pushl	$pc_rmode
+	pushl	$vc_rmode
 	jmp	prot_to_real
-	.section ".text16.prot_call", "ax", @progbits
+	.section ".text16.virt_call", "ax", @progbits
 	.code16
-pc_rmode:
+vc_rmode:
 	/* Restore registers and flags and return */
-	addw	$( PC_OFFSET_IX86 + 4 /* also skip %cs and %ss */ ), %sp
+	addw	$( VC_OFFSET_IX86 + 4 /* also skip %cs and %ss */ ), %sp
 	popw	%ds
 	popw	%es
 	popw	%fs
@@ -742,7 +742,7 @@ pc_rmode:
 	popfw	/* padding */
 
 	/* Return and discard function parameters */
-	ret	$( PC_OFFSET_END - PC_OFFSET_PARAMS )
+	ret	$( VC_OFFSET_END - VC_OFFSET_PARAMS )
 
 /****************************************************************************
  * real_call (protected-mode near call, 32-bit virtual return address)

src/arch/x86/transitions/librm_test.c

@@ -52,8 +52,8 @@ static struct profiler r2p_profiler __profiler = { .name = "r2p" };
 /** Real-mode call profiler */
 static struct profiler real_call_profiler __profiler = { .name = "real_call" };
 
-/** Protected-mode call profiler */
-static struct profiler prot_call_profiler __profiler = { .name = "prot_call" };
+/** Virtual call profiler */
+static struct profiler virt_call_profiler __profiler = { .name = "virt_call" };
 
 /**
  * Dummy function for profiling tests
@@ -101,7 +101,7 @@ static void librm_test_exec ( void ) {
 		profile_stop ( &real_call_profiler );
 	}
 
-	/* Profile complete protected-mode call cycle */
+	/* Profile complete virtual call cycle */
 	for ( i = 0 ; i < PROFILE_COUNT ; i++ ) {
 		__asm__ __volatile__ ( REAL_CODE ( "rdtsc\n\t"
 						   "movl %k0, %k2\n\t"
@@ -109,8 +109,8 @@ static void librm_test_exec ( void ) {
 						   "rdtsc\n\t" )
 				       : "=a" ( stopped ), "=d" ( discard_d ),
 					 "=R" ( started ) : );
-		profile_start_at ( &prot_call_profiler, started );
-		profile_stop_at ( &prot_call_profiler, stopped );
+		profile_start_at ( &virt_call_profiler, started );
+		profile_stop_at ( &virt_call_profiler, stopped );
 	}
 }