eth_ntoa and compilation warnings fixes

src/drivers/net/prism2.c

  * your option) any later version.
  */
 
-/* to get some global routines like printf */
 #include "etherboot.h"
-/* to get the interface to the body of the program */
 #include "nic.h"
-/* to get the PCI support functions, if this is a PCI NIC */
 #include <gpxe/pci.h>
+#include <gpxe/ethernet.h>
 
 /*
  * Hard-coded SSID
   hfa384x_setreg(hw, 0, HFA384x_INTEN); /* Disable interrupts */
   hfa384x_setreg(hw, 0xffff, HFA384x_EVACK); /* Acknowledge any spurious events */
 
+  DBG ( "MAC address %s\n", eth_ntoa ( nic->node_addr ) );
+
   /* Retrieve MAC address (and fill out nic->node_addr) */
   hfa384x_drvr_getconfig ( hw, HFA384x_RID_CNFOWNMACADDR, nic->node_addr, HFA384x_RID_CNFOWNMACADDR_LEN );
-  printf ( "MAC address %!\n", nic->node_addr );
 
   /* Prepare card for autojoin */
   /* This procedure is reverse-engineered from a register-level trace of the Linux driver's join process */
     
   /* Retrieve BSSID and print Connected message */
   result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CURRENTBSSID, hw->bssid, WLAN_BSSID_LEN);
-  printf ( "Link connected (BSSID %! - MAC address %!)\n", hw->bssid, nic->node_addr );
+
+  DBG ( "Link connected (BSSID %s - ", eth_ntoa ( hw->bssid ) );
+  DBG ( " MAC address %s)\n", eth_ntoa (nic->node_addr ) );
   
   /* point to NIC specific routines */
   nic->nic_op	= &prism2_operations;

src/drivers/net/prism2_pci.c

   pci_read_config_dword( pci, PRISM2_PCI_MEM_BASE, &membase);
   membase &= PCI_BASE_ADDRESS_MEM_MASK;
   hw->membase = (uint32_t) phys_to_virt(membase);
-  printf ( "Prism2.5 has registers at %#x\n", hw->membase );
+  printf ( "Prism2.5 has registers at %#lx\n", hw->membase );
   nic->ioaddr = hw->membase;
 
   return prism2_probe ( nic, hw );
 }
 
-static void prism2_pci_disable ( struct nic *nic,
-				 struct pci_device *pci __unused ) {
+static void prism2_pci_disable ( struct nic *nic ) {
   prism2_disable ( nic );
 }
 

src/drivers/net/prism2_plx.c

   /* Fill out hw structure */
   hw->membase = attr_mem;
   hw->iobase = iobase;
-  printf ( "PLX9052 has local config registers at %#hx\n", plx_lcr );
-  printf ( "Prism2 has attribute memory at %#x and I/O base at %#hx\n", attr_mem, iobase );
+  printf ( "PLX9052 has local config registers at %#lx\n", plx_lcr );
+  printf ( "Prism2 has attribute memory at %#lx and I/O base at %#lx\n", attr_mem, iobase );
 
   /* Search for CIS strings */
   printf ( "Searching for PCMCIA card...\n" );
   return prism2_probe ( nic, hw );
 }
 
-static void prism2_plx_disable ( struct nic *nic,
-				 struct pci_device *pci __unused ) {
+static void prism2_plx_disable ( struct nic *nic ) {
   prism2_disable ( nic );
 }