Automatically updated using

perl -pi -0777 -e 's/_probe\s*\(\s*struct dev \*dev,\s*struct pci_device \*(\w+?)\s*\)\s*{(\s*)struct nic \*nic.*?$/_probe ( struct dev *dev ) {\n${2}struct nic *nic = nic_device ( dev );\n${2}struct pci_device *$1 = pci_device ( dev );/ms' *.c

src/drivers/net/3c595.c

@@ -467,9 +467,11 @@ static void t595_irq(struct nic *nic __unused, irq_action_t action __unused)
 /**************************************************************************
 ETH_PROBE - Look for an adapter
 ***************************************************************************/
-static int t595_probe(struct dev *dev, struct pci_device *pci)
-{
-	struct nic *nic = (struct nic *)dev;
+static int t595_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pci = pci_device ( dev );
 	int i;
 	unsigned short *p;
 

src/drivers/net/3c90x.c

@@ -688,9 +688,11 @@ static void a3c90x_irq(struct nic *nic __unused, irq_action_t action __unused)
  *** initialization.  If this routine is called, the pci functions did find the
  *** card.  We just have to init it here.
  ***/
-static int a3c90x_probe(struct dev *dev, struct pci_device *pci)
-{
-    struct nic *nic = (struct nic *)dev;
+static int a3c90x_probe ( struct dev *dev ) {
+
+    struct nic *nic = nic_device ( dev );
+
+    struct pci_device *pci = pci_device ( dev );
     int i, c;
     unsigned short eeprom[0x21];
     unsigned int cfg;

src/drivers/net/davicom.c

@@ -654,9 +654,11 @@ static void davicom_irq(struct nic *nic __unused, irq_action_t action __unused)
 /*********************************************************************/
 /* eth_probe - Look for an adapter                                   */
 /*********************************************************************/
-static int davicom_probe(struct dev *dev, struct pci_device *pci)
-{
-  struct nic *nic = (struct nic *)dev;
+static int davicom_probe ( struct dev *dev ) {
+
+  struct nic *nic = nic_device ( dev );
+
+  struct pci_device *pci = pci_device ( dev );
   unsigned int i;
 
   whereami("davicom_probe\n");

src/drivers/net/dmfe.c

@@ -461,9 +461,11 @@ PROBE - Look for an adapter, this routine's visible to the outside
 
 #define board_found 1
 #define valid_link 0
-static int dmfe_probe(struct dev *dev, struct pci_device *pci)
-{
-	struct nic *nic = (struct nic *) dev;
+static int dmfe_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pci = pci_device ( dev );
 	uint32_t dev_rev, pci_pmr;
 	int i;
 

src/drivers/net/e1000.c

@@ -3580,9 +3580,11 @@ static void e1000_irq(struct nic *nic __unused, irq_action_t action)
 PROBE - Look for an adapter, this routine's visible to the outside
 You should omit the last argument struct pci_device * for a non-PCI NIC
 ***************************************************************************/
-static int e1000_probe(struct dev *dev, struct pci_device *p)
-{
-	struct nic *nic = (struct nic *)dev;
+static int e1000_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *p = pci_device ( dev );
 	unsigned long mmio_start, mmio_len;
 	int ret_val, i;
 

src/drivers/net/eepro100.c

@@ -601,9 +601,11 @@ static void eepro100_disable(struct dev *dev __unused)
  *            leaves the 82557 initialized, and ready to recieve packets.
  */
 
-static int eepro100_probe(struct dev *dev, struct pci_device *p)
-{
-	struct nic *nic = (struct nic *)dev;
+static int eepro100_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *p = pci_device ( dev );
 	unsigned short sum = 0;
 	int i;
 	int read_cmd, ee_size;

src/drivers/net/epic100.c

@@ -95,9 +95,11 @@ static unsigned char		tx_packet[PKT_BUF_SZ * TX_RING_SIZE];
 
 
     static int
-epic100_probe(struct dev *dev, struct pci_device *pci)
-{
-    struct nic *nic = (struct nic *)dev;
+epic100_probe ( struct dev *dev ) {
+
+    struct nic *nic = nic_device ( dev );
+
+    struct pci_device *pci = pci_device ( dev );
     int i;
     unsigned short* ap;
     unsigned int phy, phy_idx;

src/drivers/net/forcedeth.c

@@ -925,9 +925,11 @@ PROBE - Look for an adapter, this routine's visible to the outside
 #define IORESOURCE_MEM 0x00000200
 #define board_found 1
 #define valid_link 0
-static int forcedeth_probe(struct dev *dev, struct pci_device *pci)
-{
-	struct nic *nic = (struct nic *) dev;
+static int forcedeth_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pci = pci_device ( dev );
 	unsigned long addr;
 	int sz;
 	u8 *base;

src/drivers/net/mtd80x.c

@@ -663,9 +663,11 @@ static void mtd_disable(struct dev *dev)
 PROBE - Look for an adapter, this routine's visible to the outside
 ***************************************************************************/
 
-static int mtd_probe(struct dev *dev, struct pci_device *pci)
-{
-    struct nic *nic = (struct nic *)dev;
+static int mtd_probe ( struct dev *dev ) {
+
+    struct nic *nic = nic_device ( dev );
+
+    struct pci_device *pci = pci_device ( dev );
     int i;
 
     if (pci->ioaddr == 0)

src/drivers/net/natsemi.c

@@ -240,9 +240,11 @@ static void natsemi_irq(struct nic *nic, irq_action_t action);
  */
 
 static int
-natsemi_probe(struct dev *dev, struct pci_device *pci)
-{
-    struct nic *nic = (struct nic *)dev;
+natsemi_probe ( struct dev *dev ) {
+
+    struct nic *nic = nic_device ( dev );
+
+    struct pci_device *pci = pci_device ( dev );
     int i;
     int prev_eedata;
     u32 tmp;

src/drivers/net/ns83820.c

@@ -811,9 +811,11 @@ PROBE - Look for an adapter, this routine's visible to the outside
 
 #define board_found 1
 #define valid_link 0
-static int ns83820_probe(struct dev *dev, struct pci_device *pci)
-{
-	struct nic *nic = (struct nic *) dev;
+static int ns83820_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pci = pci_device ( dev );
 	int sz;
 	long addr;
 	int using_dac = 0;

src/drivers/net/pcnet32.c

@@ -665,9 +665,11 @@ static void pcnet32_irq(struct nic *nic __unused, irq_action_t action __unused)
 PROBE - Look for an adapter, this routine's visible to the outside
 You should omit the last argument struct pci_device * for a non-PCI NIC
 ***************************************************************************/
-static int pcnet32_probe(struct dev *dev, struct pci_device *pci)
-{
-	struct nic *nic = (struct nic *) dev;
+static int pcnet32_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pci = pci_device ( dev );
 	int i, media;
 	int fdx, mii, fset, dxsuflo, ltint;
 	int chip_version;

src/drivers/net/r8169.c

@@ -709,9 +709,11 @@ PROBE - Look for an adapter, this routine's visible to the outside
 
 #define board_found 1
 #define valid_link 0
-static int r8169_probe(struct dev *dev, struct pci_device *pci)
-{
-	struct nic *nic = (struct nic *) dev;
+static int r8169_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pci = pci_device ( dev );
 	static int board_idx = -1;
 	static int printed_version = 0;
 	int i, rc;

src/drivers/net/rtl8139.c

@@ -182,9 +182,11 @@ static void rtl_disable(struct dev *);
 static void rtl_irq(struct nic *nic, irq_action_t action);
 
 
-static int rtl8139_probe(struct dev *dev, struct pci_device *pci)
-{
-	struct nic *nic = (struct nic *)dev;
+static int rtl8139_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pci = pci_device ( dev );
 	int i;
 	int speed10, fullduplex;
 	int addr_len;

src/drivers/net/sis900.c

@@ -307,9 +307,11 @@ static int sis635_get_mac_addr(struct pci_device * pci_dev __unused, struct nic
  * Returns:   struct nic *:          pointer to NIC data structure
  */
 
-static int sis900_probe(struct dev *dev, struct pci_device *pci)
-{
-    struct nic *nic = (struct nic *)dev;
+static int sis900_probe ( struct dev *dev ) {
+
+    struct nic *nic = nic_device ( dev );
+
+    struct pci_device *pci = pci_device ( dev );
     int i;
     int found=0;
     int phy_addr;

src/drivers/net/skel.c

@@ -134,9 +134,11 @@ PROBE - Look for an adapter, this routine's visible to the outside
 
 #define board_found 1
 #define valid_link 0
-static int skel_probe(struct dev *dev, struct pci_device *pci)
-{
-	struct nic *nic = (struct nic *)dev;
+static int skel_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pci = pci_device ( dev );
 
 	if (board_found && valid_link)
 	{

src/drivers/net/sundance.c

@@ -577,9 +577,11 @@ static void sundance_disable(struct dev *dev __unused)
 /**************************************************************************
 PROBE - Look for an adapter, this routine's visible to the outside
 ***************************************************************************/
-static int sundance_probe(struct dev *dev, struct pci_device *pci)
-{
-	struct nic *nic = (struct nic *) dev;
+static int sundance_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pci = pci_device ( dev );
 	u8 ee_data[EEPROM_SIZE];
 	u16 mii_ctl;
 	int i;

src/drivers/net/tg3.c

@@ -3224,9 +3224,11 @@ static void tg3_irq(struct nic *nic __unused, irq_action_t action __unused)
 PROBE - Look for an adapter, this routine's visible to the outside
 You should omit the last argument struct pci_device * for a non-PCI NIC
 ***************************************************************************/
-static int tg3_probe(struct dev *dev, struct pci_device *pdev)
-{
-	struct nic *nic = (struct nic *)dev;
+static int tg3_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pdev = pci_device ( dev );
 	struct tg3 *tp = &tg3;
 	unsigned long tg3reg_base, tg3reg_len;
 	int i, err, pm_cap;

src/drivers/net/tlan.c

@@ -771,9 +771,11 @@ PROBE - Look for an adapter, this routine's visible to the outside
 
 #define board_found 1
 #define valid_link 0
-static int tlan_probe(struct dev *dev, struct pci_device *pci)
-{
-	struct nic *nic = (struct nic *) dev;
+static int tlan_probe ( struct dev *dev ) {
+
+	struct nic *nic = nic_device ( dev );
+
+	struct pci_device *pci = pci_device ( dev );
 	u16 data = 0;
 	int err;
 	int i;

src/drivers/net/tulip.c

@@ -1218,9 +1218,11 @@ static void tulip_irq(struct nic *nic __unused, irq_action_t action __unused)
 /*********************************************************************/
 /* eth_probe - Look for an adapter                                   */
 /*********************************************************************/
-static int tulip_probe(struct dev *dev, struct pci_device *pci)
-{
-    struct nic *nic = (struct nic *)dev;
+static int tulip_probe ( struct dev *dev ) {
+
+    struct nic *nic = nic_device ( dev );
+
+    struct pci_device *pci = pci_device ( dev );
     u32 i;
     u8  chip_rev;
     u8 ee_data[EEPROM_SIZE];

src/drivers/net/via-rhine.c

@@ -951,9 +951,11 @@ void rhine_irq ( struct nic *nic, irq_action_t action ) {
 }
 
 static int
-rhine_probe (struct dev *dev, struct pci_device *pci)
-{
-    struct nic *nic = (struct nic *)dev;
+rhine_probe ( struct dev *dev ) {
+
+    struct nic *nic = nic_device ( dev );
+
+    struct pci_device *pci = pci_device ( dev );
     struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
     if (!pci->ioaddr)
 	return 0;

src/drivers/net/w89c840.c

@@ -609,9 +609,11 @@ static void w89c840_irq(struct nic *nic __unused, irq_action_t action __unused)
 /**************************************************************************
 w89c840_probe - Look for an adapter, this routine's visible to the outside
 ***************************************************************************/
-static int w89c840_probe(struct dev *dev, struct pci_device *p)
-{
-    struct nic *nic = (struct nic *)dev;
+static int w89c840_probe ( struct dev *dev ) {
+
+    struct nic *nic = nic_device ( dev );
+
+    struct pci_device *p = pci_device ( dev );
     u16 sum = 0;
     int i, j;
     unsigned short value;