[hermon] Work around missing mport support in current BOFM implementations

Current BOFM versions are unable to create entries with mport>1, which
means that only the port 1 MAC address can be explicitly specified.

Work around this by using the provided MAC address as a base address
for all subsequent ports.  For example, if BOFM assigns the address

   00:1A:64:76:00:09 for port 1

then we will assign the addresses

   00:1A:64:76:00:09 for port 1
   00:1A:64:76:00:0a for port 2

Future BOFM versions that may correctly support mport will work with
this scheme without modification provided that the BOFM entries are
created in increasing order of mport.  Since BOFM tools tend to
generate entries in increasing order (of slot, port, etc), this is not
an unreasonable compromise.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

src/drivers/infiniband/hermon.c

@@ -3382,31 +3382,55 @@ static int hermon_bofm_update ( struct bofm_device *bofm, unsigned int mport,
 	union {
 		uint8_t bytes[8];
 		uint32_t dwords[2];
+		uint64_t qword;
 	} buf;
+	uint8_t *mac_copy = &buf.bytes[ sizeof ( buf.bytes ) - ETH_ALEN ];
 	int rc;
 
 	/* Prepare MAC address */
 	memset ( &buf, 0, sizeof ( buf ) );
-	memcpy ( &buf.bytes[ sizeof ( buf.bytes ) - ETH_ALEN ], mac,
-		 ETH_ALEN );
+	memcpy ( mac_copy, mac, ETH_ALEN );
 
-	/* Modify static configuration */
-	memset ( &stat_cfg, 0, sizeof ( stat_cfg ) );
-	MLX_FILL_2 ( &stat_cfg, 36,
-		     mac_m, 1,
-		     mac_high, ntohl ( buf.dwords[0] ) );
-	MLX_FILL_1 ( &stat_cfg, 37, mac_low, ntohl ( buf.dwords[1] ) );
-	if ( ( rc = hermon_mod_stat_cfg ( hermon, mport,
+	/* Current BOFM versions are unable to create entries with
+	 * mport>1, which means that only the port 1 MAC address can
+	 * be explicitly specified.  Work around this by using the
+	 * provided MAC address as a base address for all subsequent
+	 * ports.  For example, if BOFM assigns the address
+	 *
+	 *    00:1A:64:76:00:09 for port 1
+	 *
+	 * then we will assign the addresses
+	 *
+	 *    00:1A:64:76:00:09 for port 1
+	 *    00:1A:64:76:00:0a for port 2
+	 *
+	 * Note that hermon->cap.num_ports is not yet defined at this
+	 * point.
+	 */
+	for ( ; mport <= HERMON_MAX_PORTS ; mport++ ) {
+
+		/* Modify static configuration */
+		memset ( &stat_cfg, 0, sizeof ( stat_cfg ) );
+		MLX_FILL_2 ( &stat_cfg, 36,
+			     mac_m, 1,
+			     mac_high, ntohl ( buf.dwords[0] ) );
+		MLX_FILL_1 ( &stat_cfg, 37, mac_low, ntohl ( buf.dwords[1] ) );
+		if ( ( rc = hermon_mod_stat_cfg ( hermon, mport,
 					  HERMON_MOD_STAT_CFG_SET,
 					  HERMON_MOD_STAT_CFG_OFFSET ( mac_m ),
 					  &stat_cfg ) ) != 0 ) {
-		DBGC ( hermon, "Hermon %p port %d could not modify "
-		       "configuration: %s\n", hermon, mport, strerror ( rc ) );
-		return rc;
-	}
+			DBGC ( hermon, "Hermon %p port %d could not modify "
+			       "configuration: %s\n",
+			       hermon, mport, strerror ( rc ) );
+			return rc;
+		}
 
-	DBGC ( hermon, "Hermon %p port %d updated MAC address to %s\n",
-	       hermon, mport, eth_ntoa ( mac ) );
+		DBGC ( hermon, "Hermon %p port %d updated MAC address to %s\n",
+		       hermon, mport, eth_ntoa ( mac_copy ) );
+
+		/* Increment MAC address */
+		buf.qword = cpu_to_be64 ( be64_to_cpu ( buf.qword ) + 1 );
+	}
 
 	return 0;
 }