init

.gitignore

@@ -0,0 +1,4 @@
+*.swp
+data
+docker-compose.override.yml
+env_override

abcde/Dockerfile

@@ -0,0 +1,26 @@
+FROM robinthoni/debian-multiarch:jessie
+
+ARG CONFIG_DIR=/etc/default/config-files/
+
+RUN apt-get update &&\
+    apt-get install -y ssmtp abcde eyed3 lame eject lshw &&\
+    apt-get clean && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* && \
+    rm /etc/cron.*/*
+
+COPY ./vars-vars /etc/vars-vars
+
+COPY ./vars-files /etc/vars-files
+
+COPY ./common.sh /common.sh
+
+COPY run.sh /run.sh
+
+RUN mkdir "${CONFIG_DIR}"
+
+COPY ./config "${CONFIG_DIR}"
+
+COPY ./bin /usr/local/bin
+
+WORKDIR /data/music
+
+CMD ["/run.sh"]

abcde/bin/copy-cd-auto

@@ -0,0 +1,38 @@
+#! /usr/bin/env bash
+
+cdrom_status()
+{
+  out=$(lshw 2>/dev/null | awk '/\*-cd/,/con/' | sed -e 's/^[ \t]*//' | grep configuration | grep -Eo 'status=[^.]+' | cut -d'=' -f2)
+  echo $out
+}
+
+run_copy()
+{
+#  echo "copying..."
+#  sleep 2
+#  copy_result=1
+  abcde -a cddb,getalbumart,read,encode,tag,move,playlist,clean -V -x -N
+  copy_result="$?"
+  if [ "${copy_result}" -ne 0 ]
+  then
+    echo "Copy may have failed with code ${copy_result}"
+  else
+    echo "Copy has finished successfully"
+  fi
+}
+
+old_cdrom_status=""
+while :
+do
+  cdrom_status=$(cdrom_status)
+  if [ "${old_cdrom_status}" != "${cdrom_status}" ] && [ "${cdrom_status}" != "" ]
+  then
+    echo "CDROM drive status changed: ${cdrom_status}"
+    if [ "${cdrom_status}" == "ready" ]
+    then
+      run_copy
+    fi
+    old_cdrom_status="${cdrom_status}"
+  fi
+  sleep 1
+done

abcde/common.sh

@@ -0,0 +1,41 @@
+export CONFIG_DIR="/etc/default/config-files/"
+
+resolv_host()
+{
+  hostname="${1}"
+  ip=$(getent hosts "${hostname}" | cut -d' ' -f1)
+  echo "${ip}"
+}
+
+replace_var()
+{
+  file="${1}"
+  var="${2}"
+  sed -e "s?${var}?${!var}?g" -i "${file}"
+}
+
+replace_vars()
+{
+  file="${1}"
+  for var in $(cat /etc/vars-vars)
+  do
+    replace_var "${file}" "${var}"
+  done
+}
+
+replace_files()
+{
+  cat /etc/vars-files | while read line
+  do
+    filesrc="${CONFIG_DIR}$(echo "${line}" | awk '{print $1}')"
+    filedst=$(echo "${line}" | awk '{print $2}')
+    if [ -f "${filesrc}" ]
+    then
+      echo "Expanding file ${filesrc} to ${filedst}"
+      cp "${filesrc}" "${filedst}"
+      replace_vars "${filedst}"
+    else
+      echo "File ${filesrc} does not exist. Skipping."
+    fi
+  done
+}

abcde/config/abcde.conf

@@ -0,0 +1,554 @@
+# System defaults for abcde version 2.8.1
+# Nothing in this file is uncommented by default.
+#
+# If you wish to override these system-wide settings, create your own
+# .abcde.conf file in your home directory.
+
+# CDDB options
+# Choose whether you want to use "cddb" and/or "musicbrainz". Default
+# is "musicbrainz", but both can be specified in a comma delimited list
+# to be tried sequentially in the event of failure of the first
+# search.
+CDDBMETHOD=cddb
+
+# If you wish to use a different CDDB server, edit this line.
+# If you just wanted to use a proxy server, just set your http_proxy
+# environment variable - wget will use it correctly.
+CDDBURL="http://freedb.freedb.org/~cddb/cddb.cgi"
+
+# The CDDB protocol level.
+# Right now 5 is latin1 output and 6 is UTF8 encoding.
+CDDBPROTO=6
+
+# The CDDB protocol requires hello information, including a valid username
+# and hostname. If you feel paranoid about giving away such info, edit this
+# line - the format is username@hostname.
+HELLOINFO="`whoami`@`hostname`"
+
+# This controls the email address CDDB changes are submitted to.
+#CDDBSUBMIT=freedb-submit@freedb.org
+
+# The following options control whether or not fetched CDDB entries
+# are cached locally in $CDDBLOCALDIR
+CDDBCOPYLOCAL="y"
+CDDBLOCALDIR="$HOME/.cddb"
+CDDBLOCALRECURSIVE="y"
+
+# If NOSUBMIT is set to y, then abcde will never prompt asking if you
+# wish to submit your edited cddb file.
+#NOSUBMIT=n
+
+# If NOCDDBQUERY is set to y, then abcde will never even try to access
+# the CDDB server; running abcde will automatically drop you into a
+# blank cddb file to edit at your leisure.  This is the same as the
+# -n option.  NOCDDBQUERY=y implies NOSUBMIT=y.
+#NOCDDBQUERY=n
+
+# Select here if you want to use the locally stored CDDB entries.
+# This is useful if you do a lot of editing to those CDDB entries.
+# Also, other tools like Grip store CDDB entries under $HOME/.cddb,
+# so they can be reused when ripping CDs. (If this is set to "y" make
+# sure that CDDBLOCALRECURSIVE is also set to "y".)
+#CDDBUSELOCAL="n"
+
+# List, separated with a comma, the fields we want the parsing function to
+# output. Defaults to YEAR and GENRE, for a complete list of fields provided by
+# CDDB.
+# The fields are not case sensitive. Actually, "y,g" will work as fine as "Y,G"
+# or "YEAR, GENRE"
+#SHOWCDDBFIELDS=year,genre
+
+# Specify the style of encoder to use here -
+# oggenc, vorbize - for OGGENCODERSYNTAX
+# lame, gogo, bladeenc, l3enc, xingmp3enc, mp3enc - for MP3ENCODERSYNTAX
+# flac - the only supported for FLACENCODERSYNTAX at the moment
+# speexenc - the only encoder for SPEEXENCODERSYNTAX
+# mpcenc - encoder for MPCENCODERSYNTAX
+# wavpack, ffmpeg - encoder for WVENCODERSYNTAX
+# mac - for APENCODERSYNTAX
+# fdkaac, ffmpeg, neroAacEnc, faac, qaac, fhgaacenc - for AACENCODERSYNTAX
+# opusenc - for OPUSENCODERSYNTAX
+# twolame, ffmpeg - for MP2ENCODERSYNTAX
+# tta, ttaenc - for TTAENCODERSYNTAX
+# default is a valid option for oggenc, lame, flac, speexenc, mpcenc, wavpack,
+# fdkaac, opus, twolame and tta. Currently this affects the default location of the
+# binary, the variable to pick encoder command-line options from, and where
+# the options are given.
+#MP3ENCODERSYNTAX=default
+#OGGENCODERSYNTAX=default
+#FLACENCODERSYNTAX=default
+#SPEEXENCODERSYNTAX=default
+#MKAENCODERSYNTAX=default
+#MPCENCODERSYNTAX=default
+#WVENCODERSYNTAX=default
+#APENCODERSYNTAX=default
+#AACENCODERSYNTAX=default
+#OPUSENCODERSYNTAX=default
+#MP2ENCODERSYNTAX=default
+#TTAENCODERSYNTAX=default
+
+# Specify the syntax of the normalize binary here - so far only 'normalize'
+# is supported.
+#NORMALIZERSYNTAX=default
+
+# CD reader program to use - currently recognized options are 'cdparanoia',
+# 'libcdio' (cd-paranoia),'icedax', 'cdda2wav', 'dagrab', 'pird',
+# 'cddafs' (Mac OS X only) and 'flac'.
+#CDROMREADERSYNTAX=cdparanoia
+
+# CUE reader syntax for the CUE reader program to use.
+# abcde supports 2 CUE modes: 'mkcue' and 'abcde.mkcue' so you can set the
+# MKCUE variable accordingly. The 'abcde.mkcue' uses an internal
+# implementation, without the need of an external program.
+#CUEREADERSYNTAX=default
+
+# Specify the program to convert a CUE sheet back to a CD disc ID for CDDB queries.
+# Select between '/path/to/cue2discid' (provided as an example) or
+# 'abcde.cue2discid', implemented internaly.
+#CUE2DISCID=abcde.cue2discid
+
+# Keep the wav files after encoding. Set it to "y" and remove "clean" from
+# the list of default actions, since we purge the temp directory as default.
+#KEEPWAVS=n
+
+# Track padding: force abcde to pad tracks using 0, so every song uses a two
+# digit entry. If set to "y", even a single song encoding outputs a file like
+# 01.my_song.ext
+#PADTRACKS=n
+
+# Define if you want abcde to be non-interactive.
+# Keep in mind that there is no way to deactivate it right now in the command
+# line, so setting this option makes abcde to be always non-interactive.
+#INTERACTIVE=n
+
+# Specify 'nice'ness of the encoder, the CD reader and the distmp3 proc.
+# This is a relative 'nice'ness (that is, if the parent process is at a
+# nice level of 12, and the ENCNICE is set to 3, then the encoder will
+# run with an absolute nice value of 15. Note also, that setting these
+# to be empty will result in some default niceness increase (4 in tcsh
+# and 10 using the bsdutils' nice).
+#ENCNICE=10
+#READNICE=10
+#DISTMP3NICE=10
+
+# Paths of programs to use
+
+# Encoders:
+#LAME=lame
+#GOGO=gogo
+#BLADEENC=bladeenc
+#L3ENC=l3enc
+#XINGMP3ENC=xingmp3enc
+#MP3ENC=mp3enc
+#VORBIZE=vorbize
+#OGGENC=oggenc
+#FLAC=flac
+#SPEEXENC=speexenc
+#MPCENC=mpcenc
+#WVENC=wavpack
+#APENC=mac
+#FAAC=faac
+#NEROAACENC=neroAacEnc
+#FDKAAC=fdkaac
+#OPUSENC=opusenc
+#TWOLAME=twolame
+# Note that if you use avconv rather than FFmpeg give the
+# path to avconv here (e.g. FFMPEG=/usr/bin/avconv):
+# FFMPEG=ffmpeg
+#TTA=tta
+#TTAENC=ttaenc
+
+# The path for qaac, refalac and fhgaacenc  can be problematic as abcde
+# cannot cope with the 'standard' Wine location with spaces. For example:
+# "$HOME/.wine/drive_c/Program\ Files/qaac/qaac.exe" is problematic. Try instead:
+# "$HOME/.wine/drive_c/qaac/qaac.exe"
+# Installation instructions for qaac, refalac and fhgaacenc here:
+#    http://www.andrews-corner.org/linux/qaac.html
+#    http://www.andrews-corner.org/linux/fhgaacenc.html
+# (Hint: Use QAAC=refalac to use the Open Source alac encoder...)
+#QAAC=qaac
+#FHGAACENC=fhgaacenc
+
+# Taggers, rippers, replaygain etc:
+#ID3=id3
+#ID3V2=id3v2
+#MID3V2=mid3v2
+#EYED3=eyeD3
+#CDPARANOIA=cdparanoia
+#CD_PARANOIA=cd-paranoia
+#CDDA2WAV=icedax
+#PIRD=pird
+#CDDAFS=cp
+#CDDISCID=cd-discid
+#CDDBTOOL=cddb-tool
+#EJECT=eject
+#MD5SUM=md5sum
+#DISTMP3=distmp3
+#VORBISCOMMENT=vorbiscomment
+#METAFLAC=metaflac
+#NORMALIZE=normalize-audio
+#CDSPEED=eject
+#VORBISGAIN=vorbisgain
+#MKCUE=mkcue
+#MKTOC=cdrdao
+#DIFF=diff
+#WVGAIN=wvgain
+#APETAG=apetag
+#GLYRC=glyrc
+#IDENTIFY=identify
+#CONVERT=convert
+#DISPLAYCMD=display
+#WINE=wine
+
+# Options to call programs with:
+
+# If HTTPGET is modified, the HTTPGETOPTS options should also be defined
+# accordingly. If HTTPGET is changed, the default options will be set,
+# if HTTPGETOPTS is empty or not defined.
+#HTTPGET=wget
+# for fetch (FreeBSD): HTTPGETOPTS="-q -o -"
+# for wget: HTTPGETOPTS="-q -nv -O -"
+# for curl (MacOSX): HTTPGETOPTS="-f -s"
+#HTTPGETOPTS="-q -O -"
+
+# MP3:
+# For the best LAME encoder options have a look at:
+# <http://wiki.hydrogenaudio.org/index.php?title=LAME#Recommended_encoder_settings>
+# A good option is '-V 0' which gives Variable Bitrate Rate (VBR) recording
+# with a target bitrate of ~245 Kbps and a bitrate range of 220...260 Kbps.
+#LAMEOPTS=
+#GOGOOPTS=
+# Bladeenc still works with abcde in 2015, and the last release of bladeenc
+# was in 2001! Settings that will produce a great encode are: '-br 192' 
+#BLADEENCOPTS=
+# L3enc still works with abcde in 2015, pretty amazing when you realise 
+# that the last release of l3enc was in 1997! Settings that will produce 
+# a great encode are: '-br 256000 -hq -crc'
+#L3ENCOPTS=
+#XINGMP3ENCOPTS=
+# And mp3enc also still works with abcde in 2015 with the last release
+# of mp3enc in 1998! Settings that will produce a great encode, albeit
+# a slow one, are: '-v -br 256000 -qual 9 -no-is -bw 16500'
+#MP3ENCOPTS=
+
+# Ogg:
+#VORBIZEOPTS=
+#OGGENCOPTS=
+
+# FLAC:
+# The flac option is a workaround for an error where flac fails
+# to encode with error 'floating point exception'. This is flac 
+# error in get_console_width(), corrected in flac 1.3.1
+#FLACOPTS="--silent"
+# Options passed to MetaFlac for ReplayGain tags:
+#FLACGAINOPTS="--add-replay-gain"
+# Speex:
+#SPEEXENCOPTS=
+
+# MPP/MP+ (Musepack):
+# For the encoder options look at 'mpcenc --longhelp', consider
+# setting '--extreme' for a good quality encode.
+#MPCENCOPTS=
+
+# WavPack:
+# Look at 'wavpack --help' for detailed options, consider using '-hx3' 
+# for a good quality encode
+#WAVENCOPTS=
+# For Wavpack replay gain we set both the default of 'track gain' 
+# as well as this option for 'album gain'. Better media players
+# such as vlc can select either or neither.    
+#WVGAINOPTS='-a'
+
+# Monkey's Audio (ape)
+# Without this set mac chokes unfortunately. Choices
+# are from 1000 to 5000.
+#APENCOPTS='-c4000'
+
+# M4A/AAC
+# There are now 6 AAC encoders available to abcde, the default being
+# fdkaacenc. Note that the old AACENCOPTS has been rendered obsolete by
+# the following options, new to abcde 2.7:
+#  1. fdkaac: see 'fdkaac --help' and consider using 
+#     '--profile 2 --bitrate-mode 5 --afterburner 1'
+#     for a good quality encode. 
+#FDKAACENCOPTS='--bitrate 192k'
+#  2. FFmpeg: Use the following to use the FFmpeg native encoder, adding
+#     -strict -2 if you have an older FFmpeg:
+#     FFMPEGENCOPTS="-c:a aac -b:a 192k"
+#  3. neroAacEnc: see 'neroAacEnc -help' and
+#     consider using '-q 0.65' for a good quality encode.
+#NEROAACENCOPTS=
+#  4. faac: see 'faac --long-help' and consider
+#     using '-q 250' for a good quality encode.
+#FAACENCOPTS=
+#  5. qaac: simply run 'wine qaac.exe' to see all options and
+#     consider using '--tvbr 100' for a good quality
+#     encode or '--alac' for Apple Lossless Audio Codec
+#QAACENCOPTS=
+#  6. fhgaacenc: simply run 'wine fhgaacenc.exe' to see all options.
+#     consider using '--vbr 4' for a decent quality encode.
+#FHGAACENCOPTS=
+
+# True Audio
+# This is a lossless format so no options of any note available:
+#TTAENCOPTS=
+
+# OPUS
+# For the encoder options look at: 'opusenc -h'
+#OPUSENCOPTS=
+
+# MP2
+# Currently uses either twolame or ffmpeg, for twolame options look at:
+# 'twolame --help',a highly recommended setting is "--bitrate 320".
+#TWOLAMENCOPTS=
+
+# FFmpeg or avconv can be used for several audio codecs, as well as being
+# the default encoder for the Matroska container mka::
+# 1. Encoding to WavPack (FFmpeg only: avconv does not have a native encoder).
+#    Consider setting the following with a compression_level between 0-8:
+#    FFMPEGENCOPTS="-c:a wavpack -compression_level 6"
+# 2. Encoding to ALAC (both FFmpeg and avconv have a native encoder).
+#    Consider using the following for either FFmpeg and avconv:
+#    FFMPEGENCOPTS="-c:a alac"
+# 3. Encoding to mp2
+#    Consider using the following for either FFmpeg and avconv:
+#    FFMPEGENCOPTS="-c:a mp2 -b:a 320k"
+#FFMPEGENCOPTS=
+
+# mp3 tagging:
+# There are three ways to tag MP3 files:
+#   1. id3v1 (with id3)
+#   2. id3v2.3 (with id3v2)
+#   3. id3v2.4 (with eyeD3) This is the default
+# Use ID3TAGV to select one of the older formats:
+#ID3TAGV=id3v2.4
+#ID3OPTS=
+#ID3V2OPTS=
+#EYED3OPTS="--set-encoding=utf16-LE"
+
+# Other options:
+# The variable CDPARANOIOPTS is also used by GNU's cd-paranoia,
+# so use this when setting CDROMREADERSYNTX=libcdio.
+#CDPARANOIAOPTS=
+#CDDA2WAVOPTS=
+#PIRDOPTS="-p"
+#CDDAFSOPTS="-f"
+#CDDBTOOLOPTS=
+#EJECTOPTS=
+#DISTMP3OPTS=
+#NORMALIZEOPTS=
+#CDSPEEDOPTS="-x"
+#CDSPEEDVALUE=""
+#MKCUEOPTS=""
+#MKTOCOPTS=""
+#DIFFOPTS=""
+#VORBISCOMMENTOPTS="-R"
+#METAFLACOPTS="--no-utf8-convert"
+# Bear in mind that the AtomicParsley option '--overWrite' is already
+# used in abcde...
+#ATOMICPARSLEYOPTS=
+
+# Actions to take
+# Comma-separated list of one or more of the following:
+#  cddb,cue,read,normalize,encode,tag,move,replaygain,playlist,getalbumart,clean,default
+#   encode implies read
+#   normalize implies read
+#   tag implies cddb,read,encode
+#   move implies cddb,read,encode,tag
+#   replaygain implies cddb,read,encode,tag,move
+#   playlist implies cddb
+# An action can be added to the "default" action by specifying it along with
+# "default", without having to repeat the default ones:
+#  ACTIONS=default,playlist
+# The default action list (referenced as "default") is defined in the following
+# comment:
+#ACTIONS=cddb,read,encode,tag,move,clean
+
+# CD device you want to read from
+# It can be defined as a singletrack flac file, but since it might change from
+# file to file it makes little sense to define it here.
+CDROM=/dev/cdrom
+# If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
+# If we are using the ide-scsi emulation layer, we need to define a "g"
+#CDPARANOIACDROMBUS="d"
+
+# If you'd like to make a default location that overrides the current
+# directory for putting mp3's, uncomment this.
+OUTPUTDIR=/data/music
+
+# Or if you'd just like to put the temporary .wav files somewhere else
+# you can specify that here
+#WAVOUTPUTDIR=`pwd`
+
+# OUTPUTTYPE can be any of a number of formats, either a single format
+# (e.g. "ogg") or a combination of them separated with ","
+# (e.g. "flac,mp3"). Currently recognised and supported are:
+# "flac", "m4a", "mp3, "mpc", "ogg", "opus", "mka", "spx", "vorbis", "wav", "wv", "ape"
+OUTPUTTYPE=mp3
+
+# Output filename format - change this to reflect your inner desire to
+# organize things differently than everyone else :)
+# You have the following variables at your disposal:
+# OUTPUT, GENRE, ALBUMFILE, ARTISTFILE, TRACKFILE, TRACKNUM and YEAR.
+# Make sure to single-quote this variable. abcde will automatically create
+# the directory portion of this filename.
+# NOTICE: OUTPUTTYPE has been deprecated in the OUTPUTFORMAT string.
+# Since multiple-output was integrated we always append the file type
+# to the files. Remove it from your user defined string if you are getting
+# files like ".ogg.ogg".
+#OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
+
+# Like OUTPUTFORMAT but for Various Artists discs.
+#VAOUTPUTFORMAT='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
+
+# Like OUTPUTFORMAT and VAOUTPUTFORMAT but for the ONEFILE rips.
+#ONETRACKOUTPUTFORMAT=$OUTPUTFORMAT
+#VAONETRACKOUTPUTFORMAT=$VAOUTPUTFORMAT
+
+# Define how many encoders to run at once. This makes for huge speedups
+# on SMP systems. Defaults to 1. Equivalent to -j.
+#MAXPROCS=2
+
+# Support for systems with low disk space:
+# n:	Default parallelization (read entire CD in while encoding)
+# y:	No parallelization (rip, encode, rip, encode...)
+#LOWDISK=n
+
+# If set to y, enables batch mode normalization, which preserves relative
+# volume differences between tracks of an album.
+#BATCHNORM=n
+
+# Enables nogap encoding when using the 'lame' encoder.
+#NOGAP=y
+
+# Set the playlist file location format. Uses the same variables and format
+# as OUTPUTFORMAT. If the playlist is specified to be in a subdirectory, it
+# will be created for you and the playlist will reference files from that
+# subdirectory.
+#PLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
+# If you want to prefix every filename in a playlist with an arbitrary
+# string (such as 'http://you/yourstuff/'), use this option
+#PLAYLISTDATAPREFIX=''
+
+#Like PLAYLIST{FORMAT,DATAPREFIX} but for Various Artists discs:
+#VAPLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
+#VAPLAYLISTDATAPREFIX=''
+
+#This will give the playlist CR-LF line-endings, if set to "y".
+#(some hardware players insist on CR-LF line-endings)
+#DOSPLAYLIST=n
+
+# album art download options (see glyrc's help for details with more detailed 
+# examples here: https://github.com/sahib/glyr/wiki/Commandline-arguments).
+# For example use '--formats jpg;jpeg' to only search for JPEG images
+# These options: '--from <provider>' and '--lang <langcode>' might also be useful
+#GLYRCOPTS=
+#ALBUMARTFILE="cover.jpg"
+#ALBUMARTTYPE="JPEG"
+
+# Options for ImageMagick commands used by album art processing when available
+# For example: CONVERTOPTS="-colorspace RGB -resize 600x600>"
+# to make the image RGB and fit inside 600x600 while keeping the aspect ratio
+#IDENTIFYOPTS=
+#CONVERTOPTS=
+#DISPLAYCMDOPTS="-resize 512x512 -title abcde_album_art"
+# By default convert is only called when the image type is different from
+# ALBUMARTTYPE, use ALBUMARTALWAYSCONVERT="y" to always call convert
+#ALBUMARTALWAYSCONVERT="n"
+
+# Custom filename munging:
+# By default, abcde will do the following to CDDB data to get a useful filename:
+# 1. Delete any dots preceding the title (first sed command)
+# 2. Replace all spaces with an underscore (second sed command). Simply remove
+#   this if you prefer spaces.
+# 3. Delete a grab bag of characters which variously Windows and Linux do not permit 
+#   (tr command). Remove any of these from the list if you wish to actually use them.
+#   
+#mungefilename ()
+#{
+#	echo "$@" | sed -e 's/^\.*//' -e 's/ /_/g' | tr -d ":><|*/\"'?[:cntrl:]"
+#}
+#
+# Custom filename munging specific to track names:
+# By default this function will call the mungefilename function.
+#mungetrackname ()
+#{
+#	mungefilename $@
+#}
+#
+# Custom filename munging specific to artist names:
+# By default this function will call the mungefilename function.
+#mungeartistname ()
+#{
+#	mungefilename $@
+#}
+#
+# Custom filename munging specific to album names:
+# By default this function will call the mungefilename function.
+#mungealbumname ()
+#{
+#	mungefilename $@
+#}
+
+# Custom genre munging:
+# By default we just transform uppercase to lowercase. Not much of a fancy
+# function, with not much use, but one can disable it or just turn the first
+# Uppercase.
+#mungegenre ()
+#{
+#	echo $CDGENRE | tr "[:upper:]" "[:lower:]"
+#}
+
+
+# Custom pre-read function
+# By default it does nothing.
+# You can set some things to get abcde function in better ways:
+# * Close the CD tray using eject -t (if available in eject and supported by
+#   your CD device.
+# * Set the CD speed. You can also use the built-in options, but you can also
+#   set it here. In Debian, eject -x and cdset -x do the job.
+# KEEP IN MIND that executables included in pre_read must be in your $PATH or
+# you have to define them with full /path/to/binary
+# Uncomment and substitute the ":" with your commands.
+#pre_read ()
+#{
+#:
+#}
+
+# Custom post-read function
+# By default it does nothing.
+# You can set some things to get abcde function in better ways:
+# * Store a copy of the CD TOC.
+# KEEP IN MIND that executables included in post_read must be in your $PATH or
+# you have to define them with full /path/to/binary
+# Uncomment and substitute the ":" with your commands.
+#post_read ()
+#{
+#:
+#}
+
+# post_encode
+# By default it does nothing.
+# You can set some things to get abcde function in better ways:
+# * Move the resulting directory over the network
+# * Compare results with a previously made run, for tests
+# KEEP IN MIND that executables included in post_encode must be in your $PATH or
+# you have to define them with full /path/to/binary
+# Uncomment and substitute the ":" with your commands.
+#post_encode ()
+#{
+#:
+#}
+
+# If you'd like to have abcde eject the cdrom after all the tracks have been
+# read, uncomment the following line.
+#EJECTCD=y
+
+# To encode on the remote machines foo, bar, baz, quux, and qiix, as well as
+# on the local machine (requires distmp3 to be installed on local machine and
+# distmp3host to be installed and running on all remote machines - see README)
+#REMOTEHOSTS=foo,bar,baz,quux,qiix
+
+# Set to 1,2, etc. to obtain some information about actions happening in the background
+# Useful if you have a slow network or CDDB servers seem unresponsive.
+#EXTRAVERBOSE=0

abcde/config/bashrc

@@ -0,0 +1,3 @@
+alias copy-cd="abcde -a cddb,getalbumart,read,encode,tag,move,playlist,clean -V -x -N"
+
+echo "Tappez 'copy-cd' pour copier le cd. Le cd sera éjecté automatiquement à la fin de la copie."

abcde/config/ssmtp.conf

@@ -0,0 +1,19 @@
+# Configuartion file for sSMTP sendmail
+
+# The person who gets all mail for userids < 1000
+# Make this empty to disable rewriting.
+root=SSMTP_ROOT
+
+# We want to use this with an exim container. Link these
+# so that that container will be reachable as 'exim' in
+# this container.
+mailhub=SSMTP_MAILHUB
+
+# Where will the mail seem to come from?
+rewriteDomain=SSMTP_MAILDOMAIN
+
+# The full hostname
+#hostname=
+
+# Are users allowed to set their own From: address? (YES/NO)
+FromLineOverride=YES

abcde/run.sh

@@ -0,0 +1,7 @@
+#! /usr/bin/env bash
+
+. /common.sh
+
+replace_files
+
+sleep infinity

abcde/vars-files

@@ -0,0 +1,3 @@
+ssmtp.conf /etc/ssmtp/ssmtp.conf
+abcde.conf /root/.abcde.conf
+bashrc /root/.bashrc

abcde/vars-vars

@@ -0,0 +1,3 @@
+SSMTP_ROOT
+SSMTP_MAILHUB
+SSMTP_MAILDOMAIN

docker-compose.yml

@@ -0,0 +1,20 @@
+version: '2'
+
+services:
+    abcde:
+        build: ./abcde
+        container_name: abcde-abcde
+#        restart: unless-stopped
+        privileged: true
+        networks:
+            abcde.internal.docker:
+                aliases:
+                    - abcde.abcde.internal.docker
+        volumes:
+            - ./data/abcde/music:/data/music/
+            - "/dev/cdrom:/dev/cdrom"
+        env_file:
+            - env
+
+networks:
+    abcde.internal.docker:

env

@@ -0,0 +1,3 @@
+SSMTP_ROOT=root@example.com
+SSMTP_MAILHUB=172.17.0.1:10025
+SSMTP_MAILDOMAIN=example.com

update_vars.sh

@@ -0,0 +1,7 @@
+#! /usr/bin/env sh
+
+vars=$(cat env | cut -d= -f1)
+for docker in abcde
+do
+  echo "${vars}" > "./${docker}/vars-vars"
+done