# Autogenerated configuration file template
#################################
# 8bit-dns  Allow 8bit dns queries
#
# 8bit-dns=no

#################################
# allow-axfr-ips  Allow zonetransfers only to these subnets
#
allow-axfr-ips=PDNS_ALLOW_AXFR_IPS

#################################
# allow-dnsupdate-from  A global setting to allow DNS updates from these IP ranges.
#
allow-dnsupdate-from=PDNS_ALLOW_DNSUPDATE_FROM

#################################
# allow-notify-from Allow AXFR NOTIFY from these IP ranges. If empty, drop all incoming notifies.
#
allow-notify-from=PDNS_ALLOW_NOTIFY_FROM

#################################
# allow-recursion List of subnets that are allowed to recurse
#
allow-recursion=PDNS_ALLOW_RECURSION

#################################
# allow-unsigned-notify Allow unsigned notifications for TSIG secured domains
#
# allow-unsigned-notify=yes

#################################
# allow-unsigned-supermaster  Allow supermasters to create zones without TSIG signed NOTIFY
#
# allow-unsigned-supermaster=yes

#################################
# also-notify When notifying a domain, also notify these nameservers
#
also-notify=PDNS_ALSO_NOTIFY

#################################
# any-to-tcp  Answer ANY queries with tc=1, shunting to TCP
#
# any-to-tcp=no

#################################
# api Enable/disable the REST API
#
api=yes

#################################
# api-key Static pre-shared authentication key for access to the REST API
#
api-key=PDNS_API_KEY

#################################
# api-logfile Location of the server logfile (used by the REST API)
#
# api-logfile=/var/log/pdns.log

#################################
# api-readonly  Disallow data modification through the REST API when set
#
api-readonly=no

#################################
# cache-ttl Seconds to store packets in the PacketCache
#
# cache-ttl=20

#################################
# carbon-interval Number of seconds between carbon (graphite) updates
#
# carbon-interval=30

#################################
# carbon-ourname  If set, overrides our reported hostname for carbon stats
#
# carbon-ourname=

#################################
# carbon-server If set, send metrics in carbon (graphite) format to this server
#
# carbon-server=

#################################
# chroot  If set, chroot to this directory for more security
#
# chroot=

#################################
# config-dir  Location of configuration directory (pdns.conf)
#
config-dir=/etc/powerdns

#################################
# config-name Name of this virtual configuration - will rename the binary image
#
# config-name=

#################################
# control-console Debugging switch - don't use
#
# control-console=no

#################################
# daemon  Operate as a daemon
#
# daemon=no

#################################
# default-ksk-algorithms  Default KSK algorithms
#
# default-ksk-algorithms=ecdsa256

#################################
# default-ksk-size  Default KSK size (0 means default)
#
# default-ksk-size=0

#################################
# default-soa-edit  Default SOA-EDIT value
#
# default-soa-edit=

#################################
# default-soa-edit-signed Default SOA-EDIT value for signed zones
#
# default-soa-edit-signed=

#################################
# default-soa-mail  mail address to insert in the SOA record if none set in the backend
#
# default-soa-mail=

#################################
# default-soa-name  name to insert in the SOA record if none set in the backend
#
# default-soa-name=a.misconfigured.powerdns.server

#################################
# default-ttl Seconds a result is valid if not set otherwise
#
# default-ttl=3600

#################################
# default-zsk-algorithms  Default ZSK algorithms
#
# default-zsk-algorithms=

#################################
# default-zsk-size  Default ZSK size (0 means default)
#
# default-zsk-size=0

#################################
# direct-dnskey Fetch DNSKEY RRs from backend during DNSKEY synthesis
#
# direct-dnskey=no

#################################
# disable-axfr  Disable zonetransfers but do allow TCP queries
#
disable-axfr=no

#################################
# disable-axfr-rectify  Disable the rectify step during an outgoing AXFR. Only required for regression testing.
#
# disable-axfr-rectify=no

#################################
# disable-syslog  Disable logging to syslog, useful when running inside a supervisor that logs stdout
#
# disable-syslog=no

#################################
# disable-tcp Do not listen to TCP queries
#
# disable-tcp=no

#################################
# distributor-threads Default number of Distributor (backend) threads to start
#
# distributor-threads=3

#################################
# dname-processing  If we should support DNAME records
#
# dname-processing=no

#################################
# dnssec-key-cache-ttl  Seconds to cache DNSSEC keys from the database
#
# dnssec-key-cache-ttl=30

#################################
# dnsupdate Enable/Disable DNS update (RFC2136) support. Default is no.
#
# dnsupdate=no

#################################
# do-ipv6-additional-processing Do AAAA additional processing
#
# do-ipv6-additional-processing=yes

#################################
# domain-metadata-cache-ttl Seconds to cache domain metadata from the database
#
# domain-metadata-cache-ttl=60

#################################
# edns-subnet-processing  If we should act on EDNS Subnet options
#
# edns-subnet-processing=no

#################################
# entropy-source  If set, read entropy from this file
#
# entropy-source=/dev/urandom

#################################
# experimental-lua-policy-script  Lua script for the policy engine
#
# experimental-lua-policy-script=

#################################
# forward-dnsupdate A global setting to allow DNS update packages that are for a Slave domain, to be forwarded to the master.
#
# forward-dnsupdate=yes

#################################
# guardian  Run within a guardian process
#
guardian=yes

#################################
# include-dir Include *.conf files from this directory
#
# include-dir=
include-dir=/etc/powerdns/pdns.d

#################################
# launch  Which backends to launch and order to query them in
#
# launch=
launch=

#################################
# load-modules  Load this module - supply absolute or relative path
#
# load-modules=

#################################
# local-address Local IP addresses to which we bind
#
local-address=0.0.0.0

#################################
# local-address-nonexist-fail Fail to start if one or more of the local-address's do not exist on this server
#
# local-address-nonexist-fail=yes

#################################
# local-ipv6  Local IP address to which we bind
#
# local-ipv6=::

#################################
# local-ipv6-nonexist-fail  Fail to start if one or more of the local-ipv6 addresses do not exist on this server
#
# local-ipv6-nonexist-fail=yes

#################################
# local-port  The port on which we listen
#
# local-port=53

#################################
# log-dns-details If PDNS should log DNS non-erroneous details
#
# log-dns-details=no

#################################
# log-dns-queries If PDNS should log all incoming DNS queries
#
# log-dns-queries=no

#################################
# logging-facility  Log under a specific facility
#
# logging-facility=

#################################
# loglevel  Amount of logging. Higher is more. Do not set below 3
#
# loglevel=4

#################################
# lua-prequery-script Lua script with prequery handler (DO NOT USE)
#
# lua-prequery-script=

#################################
# master  Act as a master
#
master=yes

#################################
# max-cache-entries Maximum number of cache entries
#
# max-cache-entries=1000000

#################################
# max-ent-entries Maximum number of empty non-terminals in a zone
#
# max-ent-entries=100000

#################################
# max-nsec3-iterations  Limit the number of NSEC3 hash iterations
#
# max-nsec3-iterations=500

#################################
# max-queue-length  Maximum queuelength before considering situation lost
#
# max-queue-length=5000

#################################
# max-signature-cache-entries Maximum number of signatures cache entries
#
# max-signature-cache-entries=

#################################
# max-tcp-connections Maximum number of TCP connections
#
# max-tcp-connections=20

#################################
# module-dir  Default directory for modules
#


#################################
# negquery-cache-ttl  Seconds to store negative query results in the QueryCache
#
# negquery-cache-ttl=60

#################################
# no-shuffle  Set this to prevent random shuffling of answers - for regression testing
#
# no-shuffle=off

#################################
# non-local-bind  Enable binding to non-local addresses by using FREEBIND / BINDANY socket options
#
# non-local-bind=no

#################################
# only-notify Only send AXFR NOTIFY to these IP addresses or netmasks
#
# only-notify=0.0.0.0/0,::/0

#################################
# out-of-zone-additional-processing Do out of zone additional processing
#
# out-of-zone-additional-processing=yes

#################################
# outgoing-axfr-expand-alias  Expand ALIAS records during outgoing AXFR
#
# outgoing-axfr-expand-alias=no

#################################
# overload-queue-length Maximum queuelength moving to packetcache only
#
# overload-queue-length=0

#################################
# prevent-self-notification Don't send notifications to what we think is ourself
#
# prevent-self-notification=yes

#################################
# query-cache-ttl Seconds to store query results in the QueryCache
#
# query-cache-ttl=20

#################################
# query-local-address Source IP address for sending queries
#
# query-local-address=0.0.0.0

#################################
# query-local-address6  Source IPv6 address for sending queries
#
# query-local-address6=::

#################################
# query-logging Hint backends that queries should be logged
#
# query-logging=no

#################################
# queue-limit Maximum number of milliseconds to queue a query
#
# queue-limit=1500

#################################
# receiver-threads  Default number of receiver threads to start
#
# receiver-threads=1

#################################
# recursive-cache-ttl Seconds to store packets for recursive queries in the PacketCache
#
# recursive-cache-ttl=10

#################################
# recursor  If recursion is desired, IP address of a recursing nameserver
#
recursor=PDNS_RECURSOR_HOST

#################################
# retrieval-threads Number of AXFR-retrieval threads for slave operation
#
# retrieval-threads=2

#################################
# reuseport Enable higher performance on compliant kernels by using SO_REUSEPORT allowing each receiver thread to open its own socket
#
# reuseport=no

#################################
# security-poll-suffix  Domain name from which to query security update notifications
#
# security-poll-suffix=secpoll.powerdns.com.

#################################
# server-id Returned when queried for 'server.id' TXT or NSID, defaults to hostname - disabled or custom
#
# server-id=

#################################
# setgid  If set, change group id to this gid for more security
#
setgid=pdns

#################################
# setuid  If set, change user id to this uid for more security
#
setuid=pdns

#################################
# signing-threads Default number of signer threads to start
#
# signing-threads=3

#################################
# slave Act as a slave
#
# slave=no

#################################
# slave-cycle-interval  Schedule slave freshness checks once every .. seconds
#
# slave-cycle-interval=60

#################################
# slave-renotify  If we should send out notifications for slaved updates
#
# slave-renotify=no

#################################
# soa-expire-default  Default SOA expire
#
# soa-expire-default=604800

#################################
# soa-minimum-ttl Default SOA minimum ttl
#
# soa-minimum-ttl=3600

#################################
# soa-refresh-default Default SOA refresh
#
# soa-refresh-default=10800

#################################
# soa-retry-default Default SOA retry
#
# soa-retry-default=3600

#################################
# socket-dir  Where the controlsocket will live, /var/run when unset and not chrooted
#
# socket-dir=

#################################
# tcp-control-address If set, PowerDNS can be controlled over TCP on this address
#
# tcp-control-address=

#################################
# tcp-control-port  If set, PowerDNS can be controlled over TCP on this address
#
# tcp-control-port=53000

#################################
# tcp-control-range If set, remote control of PowerDNS is possible over these networks only
#
# tcp-control-range=127.0.0.0/8, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12, ::1/128, fe80::/10

#################################
# tcp-control-secret  If set, PowerDNS can be controlled over TCP after passing this secret
#
# tcp-control-secret=

#################################
# traceback-handler Enable the traceback handler (Linux only)
#
# traceback-handler=yes

#################################
# trusted-notification-proxy  IP address of incoming notification proxy
#
# trusted-notification-proxy=

#################################
# udp-truncation-threshold  Maximum UDP response size before we truncate
#
# udp-truncation-threshold=1680

#################################
# version-string  PowerDNS version in packets - full, anonymous, powerdns or custom
#
# version-string=full

#################################
# webserver Start a webserver for monitoring
#
webserver=yes

#################################
# webserver-address IP Address of webserver to listen on
#
webserver-address=0.0.0.0

#################################
# webserver-allow-from  Webserver access is only allowed from these subnets
#
webserver-allow-from=0.0.0.0/0,::/0

#################################
# webserver-password  Password required for accessing the webserver
#
webserver-password=PDNS_WEBSERVER_PASSWORD

#################################
# webserver-port  Port of webserver to listen on
#
webserver-port=80

#################################
# webserver-print-arguments If the webserver should print arguments
#
webserver-print-arguments=yes

#################################
# write-pid Write a PID file
#
# write-pid=yes

#################################
# xfr-max-received-mbytes Maximum number of megabytes received from an incoming XFR
#
# xfr-max-received-mbytes=100